Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY HORN ASSEMBLY
RM35X0E _58 Vehicle Interior _078378 THEFT DETERRENT / KEYLESS ENTRY _0380053 SECURITY HORN ASSEMBLY A

THEFT DETERRENT / KEYLESS ENTRY  SECURITY HORN ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 86510A 1.INSTALL SECURITY HORN ASSEMBLY

a.
E404904C01
0,0 0,0 false
V100135

Bolt
V100136

Connector


Connect the connector.

NOTICE:

Do not reuse parts if dropped or subjected to any strong impact.



b.

Attach the guide to temporarily install the security horn assembly.


c.

Install the bolt.


Hide 17701 2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for 1GD-FTV)

Hide 17801 3.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY (for 1GD-FTV)

Hide 17705 4.INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE (for 1GD-FTV)

Hide 17810D 5.INSTALL AIR FILTER ASSEMBLY (for 7GR-FKS, w/ Secondary Air Injection System)

a.
E417777C01
0,0 0,0 false
V100135

Nut
V100136

Clip


Install the air filter assembly with the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Connect the No. 5 air hose to the air pump assembly and slide the clip to secure it.


Hide 17881 6.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (for 7GR-FKS)

Hide 17751 7.INSTALL NO. 1 AIR CLEANER INLET

Hide 53106B 8.INSTALL RADIATOR COVER SUB-ASSEMBLY

Hide 11209 9.INSTALL V-BANK COVER SUB-ASSEMBLY (for 7GR-FKS)

Hide 12601B 10.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (for 1GD-FTV)