86300B
1.INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY
for Standard Roof:
|
Install in this Direction |
Attach the claw to install the No. 1 amplifier antenna assembly as shown in the illustration.
for High Roof:
|
Install in this Direction |
Attach the claw to install the No. 1 amplifier antenna assembly as shown in the illustration.
| *A | for Standard Roof |
| *B | for High Roof |
|
Install in this Direction |
Install the antenna nut.
| *A | for Standard Roof |
| *B | for High Roof |
Connect the connector.
86309E
2.INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY
3.INSTALL ROOF HEADLINING ASSEMBLY
for Semi-trim:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Semi-trim)>INSTALLATION
for Full-trim:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Full-trim)>INSTALLATION
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)
for 7GR-FKS:
for 1GD-FTV:
5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
6. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Airbag System)
7.CHECK SRS WARNING LIGHT (w/ Airbag System)
8.INSPECT SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)