Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM WARNING SWITCH (for RHD)
RM35X0E _54 Brake _078668 BRAKE SYSTEM (OTHER) _0381540 VACUUM WARNING SWITCH(for RHD) A

BRAKE SYSTEM (OTHER)  VACUUM WARNING SWITCH(for RHD)  INSTALLATION  


PROCEDURE

Hide 89420K 1.INSTALL GROMMET

a.

Install a new check valve grommet to the brake booster assembly.


Hide 83390 2.INSTALL VACUUM WARNING SWITCH ASSEMBLY

a.
C412550C02
1.5,0.406 1.698,0.583 0.198,0.177 10 true *a
*a 30°
V100136

Up


Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.


b.

Connect the connector to the vacuum warning switch assembly.


Hide 3.INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for 7GR-FKS)


b.

Install the air cleaner cap sub-assembly

Click hereGeneral>MAINTENANCE>7GR-FKS AIR CLEANER FILTER ELEMENT>INSTALLATION


Hide 17705 4.INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for 1GD-FTV)

Hide 11209 5.REMOVE V-BANK COVER SUB-ASSEMBLY (for 7GR-FKS)

Hide 12601B 6.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (for 1GD-FTV)