51495
1.REMOVE TRANSMISSION UNDER COVER (w/ Cover)
51408B
2.REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH (w/ Cover)
51407A
3.REMOVE NO. 3 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Cover)
4.INSPECT MANUAL TRANSMISSION OIL
Park the vehicle on a level surface.
Remove the manual transmission filler plug and gasket.
| *a | 0 to 5.0 mm (0 to 0.196 in.) |
Check that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the manual transmission filler plug opening.
If the result is not as specified, add manual transmission oil.
| Oil Grade | Oil Viscosity | Standard Capacity |
|---|---|---|
| "Toyota Genuine Manual Transmission Gear oil API GL-3 (GL-4)" or equivalent | SAE 75W-90 | 2.8 liters (3.0 US qts, 2.5 Imp. qts) |
Too much or too little manual transmission oil will lead to transmission problems.
After adjusting the manual transmission oil level, drive the vehicle and check the oil level again.
Inspect for manual transmission oil leaks when the manual transmission oil level is low.
Install a new gasket and the manual transmission filler plug.
51407A
5.INSTALL NO. 3 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Cover)
51408B
6.INSTALL ENGINE UNDER COVER SUB-ASSEMBLY RH (w/ Cover)
51495
7.INSTALL TRANSMISSION UNDER COVER (w/ Cover)