The stopper spring used to prevent improper installation that is included with the shift lever supply part is removed in the transmission control cable assembly adjustment procedure.
33530K
1.INSTALL SHIFT LEVER ASSEMBLY
Install the shift lever assembly with the 4 bolts.
33820B
2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for Shift Lever Assembly Side)
33820B
3.ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY
87211
4.INSTALL NO. 1 AIR DUCT (for RHD)
87211
5.INSTALL NO. 1 AIR DUCT (for LHD)
55314A
6.INSTALL CENTER LOWER INSTRUMENT PANEL