Home › Engine / Hybrid System › 1GD-FTV (ENGINE MECHANICAL) › REAR CRANKSHAFT OIL SEAL
RM35X0E _51 Engine / Hybrid System _079219 1GD-FTV ENGINE MECHANICAL _0384427 REAR CRANKSHAFT OIL SEAL A

1GD-FTV ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11381A 1.INSTALL REAR ENGINE OIL SEAL

a.

Apply MP grease to the lip of a new rear engine oil seal.

NOTICE:
·

Keep the lip free of foreign matter.

·

Do not allow MP grease to contact the dust seal.




b.
A340243C01
0.75,2.167 0.417,2.167 true 1.5,3 1.167,3 true 2.406,1.469 2.708,1.167 2.708,1.167 2.875,1.167 true 0.219,2.063 0.469,2.219 0.25,0.156 10 false *1 1.531,2.896 1.76,3.052 0.229,0.156 10 false *2 1.094,1.625 1.406,1.781 0.313,0.156 10 false *a 2.906,1.073 3.271,1.271 0.365,0.198 10 false SST
*1 Rear Oil Seal Retainer
*2 Rear Engine Oil Seal
*a 0 to 1.0 mm (0 to 0.0394 in.)


Using SST and a hammer, tap in the rear engine oil seal to the rear engine oil seal retainer edge.

SST
09351-40010  (09351-04010, 09351-04020)

NOTICE:
·

The acceptable depth from the top of the rear engine oil seal retainer is 0 to 1.0 mm (0 to 0.0394 in.)

·

Keep the lip free from foreign matter.

·

Do not tap the rear engine oil seal at an angle.

·

Make sure that the rear engine oil seal is properly installed.




Hide 13405 3.INSTALL FLYWHEEL SUB-ASSEMBLY (for Automatic Transmission)

Hide 13450 4.INSTALL FLYWHEEL WITH DAMPER ASSEMBLY (for Manual Transmission)

Hide 31250 5.INSTALL CLUTCH DISC ASSEMBLY (for Manual Transmission)

Hide 31210 6.INSTALL CLUTCH COVER ASSEMBLY (for Manual Transmission)

Hide 31210 7.INSPECT AND ADJUST CLUTCH COVER ASSEMBLY (for Manual Transmission)

Hide 35000 8.INSTALL AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)

Hide 33030 9.INSTALL MANUAL TRANSMISSION UNIT ASSEMBLY (for Manual Transmission)