Home › Engine / Hybrid System › 1GD-FTV (COOLING) › THERMOSTAT › 2019.02–2020.05
RM35X0E _51 Engine / Hybrid System _079309 1GD-FTV COOLING _0386770 THERMOSTAT A

1GD-FTV COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 51406A 1.REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ No. 2 Engine Under Cover Sub-assembly)

Hide 52618 2.REMOVE LOWER FRONT BUMPER ABSORBER

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 4.DRAIN ENGINE COOLANT

Hide 53106B 5.REMOVE RADIATOR COVER SUB-ASSEMBLY

Hide 17751 6.REMOVE NO. 1 AIR CLEANER INLET

Hide 44360 7.DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY

Hide 16470 9.REMOVE RADIATOR RESERVE TANK ASSEMBLY

Hide 16571C 10.REMOVE NO. 1 RADIATOR HOSE

Hide 88359 11.REMOVE VISCOUS HEATER V BELT (w/ Viscous Heater)

Hide 16711 12.REMOVE FAN SHROUD

Hide 13.REMOVE WATER HOSE SUB-ASSEMBLY (w/ Viscous Heater)

Hide 16207 14.DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A442838

Remove the 2 bolts and disconnect the No. 2 water by-pass pipe sub-assembly from the engine water pump assembly and water inlet.


Hide 88704 15.DISCONNECT SUCTION HOSE SUB-ASSEMBLY (w/ Air Conditioning System, w/o Viscous Heater)

a.
A442839

Remove the bolt and disconnect the suction hose sub-assembly from the water inlet.


Hide 16572D 16.DISCONNECT NO. 2 RADIATOR HOSE

a.
A442840

Slide the clip and disconnect the No. 2 radiator hose from the water inlet.


Hide 16321 17.REMOVE WATER INLET

a.
A442841

Remove the 3 bolts and water inlet.


Hide 16331A 18.REMOVE THERMOSTAT

a.
A442842

Remove the thermostat from the engine water pump assembly.


b.
A442843

Remove the gasket from the thermostat.