Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET (for Instrument Panel) › from 2019.06
RM35X0E _58 Vehicle Interior _079317 POWER OUTLETS (INT) _0385441 POWER OUTLET SOCKET(for Instrument Panel) A

POWER OUTLETS (INT)  POWER OUTLET SOCKET(for Instrument Panel)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 85535E 1.INSTALL NO. 2 POWER OUTLET SOCKET COVER

a.
B533044C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide and claw to install the No. 2 power outlet socket cover as shown in the illustration.


Hide 85530D 2.INSTALL NO. 2 POWER OUTLET SOCKET ASSEMBLY

a.
B533042C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the No. 2 power outlet socket assembly as shown in the illustration.


Hide 55620 3.INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY

a.
B533040

Attach the claw and guide to install the instrument panel cup holder assembly.


b.

Install the 5 screws.


c.
B533038

Connect the connector.


d.
B533039

w/ Telematics Transceiver:

i.

Attach the clamp.



Hide 55844 4.INSTALL NO. 2 HEATER TO REGISTER DUCT

Hide 55845A 5.INSTALL NO. 3 HEATER TO REGISTER DUCT

Hide 55990C 6.INSTALL CENTER DEFROSTER NOZZLE ASSEMBLY

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 9. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is usel.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 12.PERFORM SYSTEM INITIALIZATION AND CALIBRATION