Home › Engine / Hybrid System › 1GD-FTV (INTAKE / EXHAUST) › RADIATOR (for Water Cooled Type Intercooler) › from 2020.05
RM35X0E _51 Engine / Hybrid System _079307 1GD-FTV INTAKE / EXHAUST _0415318 RADIATOR(for Water Cooled Type Intercooler) A

1GD-FTV INTAKE / EXHAUST  RADIATOR(for Water Cooled Type Intercooler)  INSTALLATION  


PROCEDURE

Hide 16550 1.INSTALL INTERCOOLER COOLING RADIATOR ASSEMBLY

a.
A453388

Install the intercooler cooling radiator assembly to the No. 1 cooler bracket with the 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 16535 2.INSTALL LOWER RADIATOR SUPPORT

Hide 3.INSTALL GROMMET

a.

Install the 2 grommets to the front crossmember sub-assembly.


Hide 57104D 4.INSTALL FRONT CROSSMEMBER SUB-ASSEMBLY

a.

Install the front crossmember sub-assembly with the 4 bolts.

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


Hide 51107D 5.INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY

a.

Install the rear side rail reinforcement sub-assembly RH and rear side rail reinforcement sub-assembly LH with the 8 bolts.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


Hide 17942 6.INSTALL NO. 2 INTERCOOLER AIR GUIDE

a.

Attach the 2 claws to install the No. 2 intercooler air guide.


Hide 17941 7.INSTALL NO. 1 INTERCOOLER AIR GUIDE

a.

Attach the 2 claws to install the No. 1 intercooler air guide.


Hide 17312B 8.INSTALL NO. 2 AIR INLET DUCT

a.
A438177

for RH Side:

Attach the 2 claws to install the No. 2 air inlet duct.


b.
A438465

for LH Side:

Attach the 2 claws to install the No. 2 air inlet duct.


Hide 44402 9.CONNECT NO. 1 POWER STEERING OIL COOLER SUB-ASSEMBLY

a.

Connect the No. 1 power steering oil cooler sub-assembly with the 2 bolts.

Torque:
28 N*m (286 kgf*cm, 21 ft.*lbf)


Hide 53287B 10.INSTALL RADIATOR SUPPORT EXTENSION RH

a.

Attach the 2 claws to install the radiator support extension RH.


Hide 53288B 11.INSTALL RADIATOR SUPPORT EXTENSION LH

a.

Attach the 2 claws to install the radiator support extension LH.


Hide 165A0 12.CONNECT NO. 1 INTERCOOLER COOLING WATER HOSE ASSEMBLY

a.

Connect the No. 1 intercooler cooling water hose assembly to the intercooler cooling radiator assembly and slide the hose clamp to secure the hose.


Hide 16554C 13.CONNECT NO. 4 INTERCOOLER COOLING WATER HOSE

a.

Connect the No. 4 intercooler cooling water hose to the intercooler cooling radiator assembly and slide the hose clamp to secure the hose.


Hide 53209B 14.INSTALL HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY

Hide 17311B 15.INSTALL NO. 1 AIR INLET DUCT

Hide 51405A 19.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 52618 20.INSTALL LOWER FRONT BUMPER ABSORBER

Hide 51406A 21.INSTALL NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY