89422C
1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
Install a new gasket to the engine coolant temperature sensor.
Using SST, install the engine coolant temperature sensor to the cylinder head sub-assembly.
Connect the engine coolant temperature sensor connector.
44320
2.CONNECT VANE PUMP ASSEMBLY
3.ADD ENGINE COOLANT
for Air Cooled Type Intercooler:
for Water Cooled Type Intercooler:
Click hereGeneral>MAINTENANCE>1GD-FTV COOLANT (for Water Cooled Type Intercooler)>REPLACEMENT
4.INSPECT FOR ENGINE COOLANT LEAK
12601B
5.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY