2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

TERMINALS OF ECU

System information · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 Jul 2010 – Jun 2012 from Jul 2012


NAVIGATION RECEIVER ASSEMBLY
*1: w/ Rear View Monitor System
*2: w/ Parking Assist Monitor System
E153702E01
Terminal No. (Symbols)
Wiring Color
Terminal Description
Condition
Specification
E4-1 (PKB) - E6-7 (GND)
LG - W-B
Parking brake signal
See "Vehicle Signal Check" (Click here)
-
E4-2 (IG) - E6-7 (GND)
G - W-B
Power source (IG)
Ignition switch on (IG)
11 to 14 V
Ignition switch off
Below 1 V
E4-3 (SPD) - E6-7 (GND)
BR - W-B
Speed signal from combination meter
See "Vehicle Signal Check" (Click here)
-
E4-5 (REV) - E6-7 (GND)
R - W-B
Reverse signal
See "Vehicle Signal Check" (Click here)
-
E6-1 (FR+) - E6-7 (GND)
LG - W-B
Sound signal (Front Right)
Audio system is playing
A waveform synchronized with sounds is output
E6-2 (FL+) - E6-7 (GND)
P - W-B
Sound signal (Front Left)
Audio system is playing
A waveform synchronized with sounds is output
E6-3 (ACC) - E6-7 (GND)
GR - W-B
Accessory (ON)
Ignition switch off → on (ACC)
Below 1 V → 11 to 14 V
E6-4 (B) - E6-7 (GND)
B - W-B
Battery
Always
11 to 14 V
E6-5 (FR-) - E6-7 (GND)
L - W-B
Sound signal (Front Right)
Audio system is playing
A waveform synchronized with sounds is output
E6-6 (FL-) - E6-7 (GND)
V - W-B
Sound signal (Front Left)
Audio system is playing
A waveform synchronized with sounds is output
E6-7 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 V
E6-8 (ANT) - E6-7 (GND)
B - W-B
Power source of antenna
Radio switch ON and AM or FM
11 to 14 V
E6-10 (ILL+) - E6-7 (GND)
G - W-B
Illumination signal
Light control switch OFF → TAIL or HEAD
Below 1 V → 11 to 14 V
E7-1 (RR+) - E6-7 (GND)
R - W-B
Sound signal (Rear Right)
Audio system is playing
A waveform synchronized with sounds is output
E7-2 (RL+) - E6-7 (GND)
B - W-B
Sound signal (Rear Left)
Audio system is playing
A waveform synchronized with sounds is output
E7-3 (RR-) - E6-7 (GND)
W - W-B
Sound signal (Rear Right)
Audio system is playing
A waveform synchronized with sounds is output
E7-5 (ILL-) - E6-7 (GND)
W - W-B
Illumination signal
Turn ignition switch on (IG)
Light control switch OFF → TAIL or ON (Light intensity is not max. or min.)
Below 1 V → Pulse generation
E7-6 (RL-) - E6-7 (GND)
Y - W-B
Sound signal (Rear Left)
Audio system is playing
A waveform synchronized with sounds is output
E2-6 (SWG) - Body ground
B - Body ground
Steering pad switch ground
Always
Below 1 V
E2-7 (SW1) - E2-6 (SWG)
O - B
Steering pad switch signal
No switch is pushed
→ SEEK+ switch pushed
→ SEEK- switch pushed
→ VOL+ switch pushed
→ VOL- switch pushed
4 V or higher
→ Approx. 0.5 V
→ Approx. 0.9 V
→ Approx. 2.0 V
→ Approx. 3.4 V
E2-8 (SW2) - E2-6 (SWG)
V - B
Steering pad switch signal
No switch is pushed
→ MODE switch pushed
→ ON HOOK switch pushed
→ OFF HOOK switch pushed
→ VOICE switch pushed
4 V or higher
→ Approx. 0.5 V
→ Approx. 0.9 V
→ Approx. 2.0 V
→ Approx. 3.4 V
E2-9 (TX+) - E2-10 (TX-)
P - G
AVC-LAN communication signal
Ignition switch on (ACC)
2 to 3 V
E3-12 (TSW-) - E6-7 (GND)
Y - W-B
Telephone relation switch signal
Always
Below 1 V
E3-17 (MACC) - E6-7 (GND)
P - W-B
Microphone AMP power supply
Ignition switch off → on (IG)
Below 1 V → 5 V
E3-18 (SGND) - E6-7 (GND)
Y - W-B
Ground
Always
Below 1 V
E3-19 (MIC+) - E6-7 (GND)
R - W-B
Microphone voice signal
See "Microphone Check" (Click here)
-
E3-20 (MIC-) - Body ground
G - Body ground
Microphone voice signal
See "Microphone Check" (Click here)
-
E3-21 (CGND) - Body ground (*1)
W - Body ground
Ground
Always
Below 1 V
E3-22 (V+) - E3-21 (CGND) (*1)
R - W
Television camera image signal
Turn ignition switch on (IG), shift lever in R position
Pulse generation
(Refer to waveform 2)
E3-23 (V-) - E3-21 (CGND) (*1)
Shielded - W
Shielded ground
Always
Below 1 V
E3-24 (CA+) - E6-7 (GND) (*1)
B - W-B
Television camera power supply
Turn ignition switch on (IG), shift lever in R position
Approx. 6 V
E21-1 (GVO+) - E6-7 (GND) (*2)
B - W-B
Digital image signal (Input)
Parking assist monitor system display is on
Pulse generation
E21-2 (GVO-) - E6-7 (GND) (*2)
B - W-B
Digital image signal (Input)
Parking assist monitor system display is on
Pulse generation
E21-3 (GVG1) - Body ground (*2)
B - W-B
Ground
Always
Below 1 V

  1. E057967E01
    Reference: waveform 1

    HINT:
    1. Terminal: E3-22 (V+) - E3-21 (CGND)
    2. Gauge set: 0.2 V/DIV, 0.2 μs/DIV
    3. Condition: Ignition switch: on (IG), shift lever: R position


TELEVISION CAMERA ECU (w/ Parking Assist Monitor System) (Click here)
← TERMINALS OF ECU (May 2007 – Jul 2008)TERMINALS OF ECU (Jul 2010 – Jun 2012) →