HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built May 2007 – Jul 2008
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010
- HINT:
- Use the following procedure to troubleshoot the parking assist monitor system.
- *: Use the intelligent tester.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| NEXT |
|
 |
|
|
| 2.CUSTOMER PROBLEM ANALYSIS |
| NEXT |
|
 |
|
|
| 3.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| NEXT |
|
 |
|
|
| 4.CHECK CAN COMMUNICATION SYSTEM* |
Refer to HOW TO PROCEED WITH TROUBLESHOOTING (Click here).Check for output DTCs.
- Result:
Result
|
Proceed to
|
CAN DTC is not output
|
A
|
CAN DTC is output
|
B
|
|
B.
|
 |
|
|
| A |
|
 |
|
|
| 5.CHECK DTC OF NAVIGATION SYSTEM |
Refer to the diagnostic check/clear of the navigation system (Click here).
- Result:
Result
|
Proceed to
|
DTC is not output
|
A
|
DTC is output
|
B
|
|
B.
|
 |
|
|
| A |
|
 |
|
|
Refer to the diagnostic check/clear (Click here ).
- Result:
Result
|
Proceed to
|
DTC is not output
|
A
|
DTC is output
|
B
|
|
B.
|
 |
|
|
| A |
|
 |
|
|
| 7.CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM |
Refer to the navigation system (Click here).
- Result:
Result
|
Proceed to
|
Symptom does not appear
|
A
|
Symptom appears
|
B
|
|
B.
|
 |
|
|
| A |
|
 |
|
|
Find the applicable symptom in the problem symptoms table (Click here).
- Result:
Result
|
Proceed to
|
Fault is not listed in problem symptoms table
|
A
|
Fault is listed in problem symptoms table
|
B
|
- HINT:
- If the symptom does not recur and no code is output, perform the symptom reproduction method (Click here).
|
B.
|
 |
|
|
| A |
|
 |
|
|
| 9.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU (Click here)
| NEXT |
|
 |
|
|
| 10.ADJUST, REPAIR OR REPLACE |
| NEXT |
|
 |
|
|