Home › COMMUNICATION SYSTEM › MULTIPLEX COMMUNICATION › LIN COMMUNICATION SYSTEM

LIN COMMUNICATION SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
*: Use Techstream.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      HINT:
      If the voltage is below 11 V, recharge or replace the battery before proceeding.


    NEXT


    3.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
    1. Using Techstream , inspect the CAN communication function to ensure there are no malfunctions in the communication system.

      Result:
      Result
      Proceed to
      No DTCs output
      A
      DTCs output
      B



    B.
    GO TO CAN COMMUNICATION SYSTEM (Click here)
    A


    4.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
    1. Using Techstream , inspect the LIN communication function to ensure there are no malfunctions in the communication system (Click here ).

      Result:
      Result
      Proceed to
      No DTCs output (LIN communication error does not occur.)
      A
      No DTCs output (LIN communication error occurs.)
      B
      DTCs output
      C



    B.
    PROBLEM SYMPTOMS TABLE (Click here)

    C.
    DIAGNOSTIC TROUBLE CODE CHART (Click here)
    A


    5.OVERALL ANALYSIS AND TROUBLESHOOTING*
    1. DATA LIST/ACTIVE TEST (Click here)

    2. Terminals of ECU (Click here)


    NEXT


    6.ADJUST, REPAIR OR REPLACE

      NEXT

      END