Home › Vehicle Exterior › MIRROR (EXT) › POWER MIRROR CONTROL SYSTEM(w/o Memory)
RM3160E _59 Vehicle Exterior _019720 MIRROR (EXT) _0101073 POWER MIRROR CONTROL SYSTEM(w/o Memory) J

MIRROR (EXT)  POWER MIRROR CONTROL SYSTEM(w/o Memory)  AUTO Power Retract Mirrors do not operate  


DESCRIPTION

The outer mirror switch assembly sends a mirror auto retract/return signal to the main body ECU (multiplex network body ECU) when the retractable outer mirror switch on the outer mirror switch assembly is in the AUTO position. The main body ECU (multiplex network body ECU) retracts or returns the outer rear view mirror assemblies based on the lock/unlock signal of each door while the ignition switch is off.

WIRING DIAGRAM

B363741E01
1.146,0.542 1.458,0.74 0.313,0.198 10 false MR 1.156,0.958 1.563,1.198 0.406,0.24 10 false MF 1.25,2.125 1.563,2.323 0.313,0.198 10 false E 0.313,2.875 0.625,3.073 0.313,0.198 10 false I9 1.469,0.542 1.688,0.74 0.219,0.198 10 false 2 1.469,0.958 1.688,1.156 0.219,0.198 10 false 4 1.469,2.115 1.688,2.313 0.219,0.198 10 false 5 0.302,3.021 1.531,3.427 1.229,0.406 10 false Outer Mirror Switch Assembly 5.073,2.302 5.385,2.5 0.313,0.198 10 false F18 5.063,2.469 6.708,2.958 1.646,0.49 10 false Main Body ECU (Multiplex Network Body ECU) 4.854,0.979 5.167,1.177 0.313,0.198 10 false 15 4.854,1.729 5.167,1.927 0.313,0.198 10 false 19 2.385,5.833 2.698,6.031 0.313,0.198 10 false 3 4.865,1.344 5.177,1.542 0.313,0.198 10 false 20 4.854,0.552 5.167,0.75 0.313,0.198 10 false 14 5.125,0.667 5.583,0.865 0.458,0.198 10 false RET 5.115,1.833 5.573,2.031 0.458,0.198 10 false RETR 5.125,1.083 5.583,1.281 0.458,0.198 10 false RTR 3.302,3.073 4.219,3.313 0.917,0.24 10 false from Battery 5.115,1.458 5.573,1.656 0.458,0.198 10 false RTRR 0.615,5.844 0.927,6.042 0.313,0.198 10 false 3 3.031,3.677 3.948,3.917 0.917,0.24 10 false MIR HTR 4.917,5.167 6.135,5.406 1.219,0.24 10 false MIR RTR NO. 1 4.896,7.479 6.115,7.719 1.219,0.24 10 false MIR RTR NO. 2 0.188,7.365 0.5,7.563 0.313,0.198 10 false H1 0.802,6.083 1.115,6.281 0.313,0.198 10 false MR 2.573,6.083 2.885,6.281 0.313,0.198 10 false MR 2,6.844 2.313,7.042 0.313,0.198 10 false MF 1.052,6.844 1.365,7.042 0.313,0.198 10 false MF 1.344,6.833 1.656,7.031 0.313,0.198 10 false 8 1.823,6.833 2.135,7.031 0.313,0.198 10 false 8 1.948,7.344 2.26,7.542 0.313,0.198 10 false I1 0.177,7.521 1.219,8.042 1.042,0.521 10 false Outer Rear View Mirror Assembly RH 1.948,7.5 2.99,8.021 1.042,0.521 10 false Outer Rear View Mirror Assembly LH 4.844,7.979 6.115,8.24 1.271,0.26 10 false Relay Block No. 5 5.969,3.938 6.125,4.135 0.156,0.198 10 false 1 5.99,4.448 6.146,4.646 0.156,0.198 10 false 3 4.667,3.938 4.823,4.135 0.156,0.198 10 false 2 4.667,4.219 4.823,4.417 0.156,0.198 10 false 5 4.677,4.688 4.833,4.885 0.156,0.198 10 false 4 6,6.25 6.156,6.448 0.156,0.198 10 false 1 6,6.802 6.156,7 0.156,0.198 10 false 3 4.667,6.25 4.823,6.448 0.156,0.198 10 false 2 4.667,6.604 4.823,6.802 0.156,0.198 10 false 5 4.667,7.021 4.823,7.219 0.156,0.198 10 false 4

CAUTION / NOTICE / HINT

NOTICE:
·

If the main body ECU (multiplex network body ECU) is replaced, refer to Service Bulletin.*

*: w/ Smart Entry and Start System


·

Inspect the fuses for circuits related to this system before performing the following procedure.

·

As the door control battery is installed between the vehicle battery and main body ECU (multiplex network body ECU), first perform the inspections in On-Vehicle Inspection to confirm that there are no malfunctions in the power source circuit for the main body ECU (multiplex network body ECU) before performing this troubleshooting procedure.*

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>ON-VEHICLE INSPECTION

*: for LHD




PROCEDURE

1.CHECK POWER RETRACT MIRROR FUNCTION
a.

Check the power retract mirror function.

Click hereVehicle Exterior>MIRROR (EXT)>POWER MIRROR CONTROL SYSTEM(w/ Memory)>OPERATION CHECK

OK:

Power retract mirror function operates normally.



Result:
Proceed to
OK
NG



OK

2.CHECK POWER DOOR LOCK CONTROL SYSTEM

NG

GO TO OTHER DIAGNOSIS PROCEDURE (Power Retractable Mirrors do not Operate with Power Retract Mirror Switch)

2.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check the power door lock control system.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>OPERATION CHECK

OK:

Power door lock control system is normal.



Result:
Proceed to
OK
NG



OK

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

NG

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
a.

Check the wireless door lock control system.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System)>OPERATION CHECK

OK:

Wireless door lock control system is normal.



Result:
Result Proceed to
OK (w/ Smart Entry and Start System) A
OK (w/o Smart Entry and Start System) B
NG C



A

4.CHECK SMART ENTRY AND START SYSTEM (for Entry Function)

B

5.INSPECT OUTER MIRROR SWITCH ASSEMBLY

C

4.CHECK SMART ENTRY AND START SYSTEM (for Entry Function)
a.

Check the smart entry and start system (for Entry Function).

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>SMART ENTRY AND START SYSTEM(for Entry Function)>OPERATION CHECK

OK:

Smart entry and start system (for Entry Function) is normal.



Result:
Proceed to
OK
NG



OK

5.INSPECT OUTER MIRROR SWITCH ASSEMBLY

NG

5.INSPECT OUTER MIRROR SWITCH ASSEMBLY
a.

Remove the outer mirror switch assembly.

Click hereVehicle Exterior>MIRROR (EXT)>OUTER MIRROR SWITCH>REMOVAL


b.

Inspect the outer mirror switch assembly.

Click hereVehicle Exterior>MIRROR (EXT)>OUTER MIRROR SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG

REPLACE OUTER MIRROR SWITCH ASSEMBLY