Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › 2013.12–2016.11
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0103404 AUTOMATIC HIGH BEAM SYSTEM C

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  B124C  Automatic High Beam Camera  


DESCRIPTION

This DTC is stored when the main body ECU (multiplex network body ECU) detects a malfunction in the lane departure warning camera.

DTC No. Detection Item DTC Detection Condition Trouble Area
B124C Automatic High Beam Camera Malfunction in lane departure warning camera (automatic high beam camera)
(Detected for 2 seconds or more)
·

Lane departure warning camera

·

Main body ECU (multiplex network body ECU)



WIRING DIAGRAM

E256752
1.521,0.458 1.615,0.635 0.094,0.177 10 false 6 0.688,2.427 2.438,2.604 1.75,0.177 10 false : CAN Communication Line 4.427,0.76 4.604,0.938 0.177,0.177 10 false 15 2.979,0.458 3.156,0.635 0.177,0.177 10 false 13 2.979,0.781 3.156,0.958 0.177,0.177 10 false 12 4.427,0.438 4.604,0.615 0.177,0.177 10 false 16 1.5,0.781 1.677,0.958 0.177,0.177 10 false 12 3.958,0.917 4.333,1.083 0.375,0.167 10 false CA1L 3.26,0.927 3.708,1.104 0.448,0.177 10 false CA2L 3.938,0.594 4.385,0.771 0.448,0.177 10 false CA1H 3.26,0.604 3.708,0.781 0.448,0.177 10 false CA2H 1.031,0.615 1.417,0.792 0.385,0.177 10 false CA1P 1.021,0.927 1.406,1.104 0.385,0.177 10 false CA1N 3.031,1.74 4.479,1.917 1.448,0.177 10 false Network Gateway ECU 3.031,1.573 3.302,1.75 0.271,0.177 10 false F85 0.177,1.417 0.448,1.594 0.271,0.177 10 false S4 0.177,1.594 2.292,1.927 2.115,0.333 10 false Lane Departure Warning Camera 5.448,1.604 7.094,1.938 1.646,0.333 10 false Main Body ECU (Multiplex Network Body ECU) 5.729,0.76 5.906,0.938 0.177,0.177 10 false 13 6.021,0.917 6.469,1.094 0.448,0.177 10 false CANL 5.729,0.438 5.906,0.615 0.177,0.177 10 false 14 5.448,1.427 5.76,1.635 0.313,0.208 10 false F19 6.021,0.594 6.469,0.771 0.448,0.177 10 false CANH

CAUTION / NOTICE / HINT

NOTICE:
·

Confirm that there are no CAN communication system malfunctions before performing the following inspection.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>DIAGNOSIS SYSTEM

·

If the main body ECU (multiplex network body ECU) is replaced, refer to Service Bulletin.*

*: w/ Smart Entry and Start System


·

As the door control battery is installed between the vehicle battery and main body ECU (multiplex network body ECU), first perform the inspections in On-Vehicle Inspection to confirm that there are no malfunctions in the power source circuit for the main body ECU (multiplex network body ECU) before performing this troubleshooting procedure.*

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>ON-VEHICLE INSPECTION

*: for LHD




PROCEDURE

1.CHECK FOR DTC (AUTOMATIC HIGH BEAM SYSTEM)
a.

Clear the DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR

Body Electrical > Main Body > Clear DTCs
50002 123

b.

Check for DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR

Body Electrical > Main Body > Trouble Codes
50001 123

Result:
Result Proceed to
DTC B124C is not output A
DTC B124C is output B



A

B

2.CHECK FOR DTC (LANE DEPARTURE ALERT SYSTEM)
2.CHECK FOR DTC (LANE DEPARTURE ALERT SYSTEM)
a.

Check for DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>LANE DEPARTURE ALERT SYSTEM>DTC CHECK / CLEAR

Chassis > Lane Departure Alert > Trouble Codes
50001 355
OK:

Lane departure alert system DTCs are not output.



Result:
Proceed to
OK
NG



OK

3.CHECK LANE DEPARTURE WARNING CAMERA

NG

3.CHECK LANE DEPARTURE WARNING CAMERA
a.

Replace the lane departure warning camera with a new or known good one.

Click hereEngine / Hybrid System>CRUISE CONTROL>LANE RECOGNITION CAMERA SENSOR>REMOVAL


b.

Check for DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR

Body Electrical > Main Body > Trouble Codes
50001 123
OK:

DTC B124C is not output.



Result:
Proceed to
OK
NG



OK

END (LANE DEPARTURE WARNING CAMERA WAS DEFECTIVE)

NG

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)