Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2013.12–2016.11
RM3160E _58 Vehicle Interior _019708 METER / GAUGE / DISPLAY _0104486 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  B150A  Lost Communication with HMI-LAN  


DESCRIPTION

The combination meter assembly receives a text data signal from the navigation receiver assembly*1 or radio and display receiver assembly*2 via local bus communication.

Based on this signal, navigation system information is displayed on the multi-information display.

This DTC is stored when the combination meter assembly cannot receive the signal.

*1: for Navigation Receiver Type

*2: for Radio and Display Type


DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
B150A Lost Communication with HMI-LAN After the combination meter assembly receives a registration information signal, which is sent by the navigation receiver assembly*1 or radio and display receiver assembly*2 when the ignition switch is ACC, 1 or more times, the combination meter assembly cannot receive the signal for 30 seconds or more.
·

Harness or connector

·

Navigation receiver assembly*1

·

Radio and display receiver assembly*2

·

Combination meter assembly


DTC stored -

*1: for Navigation Receiver Type

*2: for Radio and Display Type


WIRING DIAGRAM

for Navigation Receiver Type


E274272E13
0.813,1.906 3.323,2.229 2.51,0.323 10 false Navigation Receiver Assembly 2.26,0.594 2.448,0.76 0.188,0.167 10 false 4 4.885,0.573 5.094,0.74 0.208,0.167 10 false 19 4.833,1.74 5.167,1.906 0.333,0.167 10 false F22 4.833,1.906 6.781,2.177 1.948,0.271 10 false Combination Meter Assembly 0.813,1.75 1.271,1.917 0.458,0.167 10 false F117 1.792,0.74 2.208,0.906 0.417,0.167 10 false CNL1 5.146,0.74 5.563,0.906 0.417,0.167 10 false MSCL 5.156,1.302 5.573,1.469 0.417,0.167 10 false MSCH 2.26,1.156 2.448,1.333 0.188,0.177 10 false 3 4.885,1.146 5.094,1.333 0.208,0.188 10 false 18 0.979,2.375 3.125,2.646 2.146,0.271 10 false : Local Bus Communication Line 1.771,1.302 2.188,1.469 0.417,0.167 10 false CNH1


for Radio and Display Type


E274272E14
1.073,1.938 3.406,2.219 2.333,0.281 10 false Radio and Display Receiver Assembly 2.26,0.594 2.448,0.76 0.188,0.167 10 false 4 4.875,0.594 5.042,0.76 0.167,0.167 10 false 19 4.833,1.781 5.167,1.948 0.333,0.167 10 false F22 4.833,1.948 7.063,2.323 2.229,0.375 10 false Combination Meter Assembly 1.083,1.781 1.417,1.948 0.333,0.167 10 false F72 1.792,0.74 2.208,0.906 0.417,0.167 10 false CNL1 5.146,0.74 5.563,0.906 0.417,0.167 10 false MSCL 5.156,1.302 5.573,1.469 0.417,0.167 10 false MSCH 2.26,1.146 2.448,1.323 0.188,0.177 10 false 3 4.875,1.146 5.052,1.333 0.177,0.188 10 false 18 0.99,2.385 3.667,2.604 2.677,0.219 10 false : Local Bus Communication Line 1.771,1.302 2.188,1.469 0.417,0.167 10 false CNH1


PROCEDURE

1.CHECK FOR DTC
a.

Check if Navigation System DTCs are output.

for Navigation Receiver Type: Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Navigation Receiver Type)>DTC CHECK / CLEAR

for Radio and Display Type: Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Radio and Display Type)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

Navigation system DTCs are not output.



Result:
Result Proceed to
Navigation system DTCs are not output. A
Navigation system DTCs are output. B



A

2.CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - NAVIGATION RECEIVER ASSEMBLY OR RADIO AND DISPLAY RECEIVER ASSEMBLY)

B

2.CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - NAVIGATION RECEIVER ASSEMBLY OR RADIO AND DISPLAY RECEIVER ASSEMBLY)
a.

Disconnect the F22 combination meter assembly connector.


b.

Disconnect the F117 navigation receiver assembly*1 or F72 radio and display receiver assembly*2 connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F117-3 (CNH1) - F22-18 (MSCH)*1 Always Below 1 Ω
F117-4 (CNL1) - F22-19 (MSCL)*1 Always Below 1 Ω
F72-3 (CNH1) - F22-18 (MSCH)*2 Always Below 1 Ω
F72-4 (CNL1) - F22-19 (MSCL)*2 Always Below 1 Ω
F22-18 (MSCH) - Body ground Always 10 kΩ or higher
F22-19 (MSCL) - Body ground Always 10 kΩ or higher


*1: for Navigation Receiver Type

*2: for Radio and Display Type



Result:
Proceed to
OK
NG



OK

3.REPLACE COMBINATION METER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.REPLACE COMBINATION METER ASSEMBLY
a.

Replace the combination meter assembly with a new or known good one.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


b.

Turn the ignition switch to ON and wait 30 seconds.

NOTICE:

A maximum of 30 seconds is required to send/receive the registration information between the combination meter assembly and navigation receiver assembly*1 or radio and display receiver assembly*2.

*1: for Navigation Receiver Type

*2: for Radio and Display Type




c.

Operate the steering pad switch assembly and check that the audio tab illuminates.


d.

Check for DTCs.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes
50001 122

Result:
Result Proceed to
The audio tab illuminates and DTC B150A is not output. A
The audio tab does not illuminate and DTC B150A is output. (for Navigation Receiver Type) B
The audio tab does not illuminate and DTC B150A is output. (for Radio and Display Type) C



A

END

B

C

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY