Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK SYSTEM
RM3160E _58 Vehicle Interior _019708 METER / GAUGE / DISPLAY _0104487 CLOCK SYSTEM T

METER / GAUGE / DISPLAY  CLOCK SYSTEM  PROBLEM SYMPTOMS TABLE  


NOTICE:

If the main body ECU (multiplex network body ECU) is replaced, refer to Service Bulletin.*1

*1: w/ Smart Entry and Start System



HINT:

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


Clock System
Symptom Suspected Area Link
Clock does not operate at all Fuse (MPX-B NO. 1, IG1 NO. 3, ECU-ACC) -
Wire harness or connector -
Clock assembly Click here
Clock display illumination malfunction Clock assembly Click here
Combination meter assembly Click here
Wire harness or connector -
Clock display illumination does not dim at night Clock assembly Click here
Main body ECU (Multiplex network body ECU) Click here
Wire harness or connector -
Clock loses or gains time Clock assembly Click here
Clock cannot be adjusted Clock assembly Click here