46430
1.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
Install the No. 1 parking brake cable support bracket, No. 2 parking brake cable support bracket and No. 2 cable support bracket to the No. 3 parking brake cable assembly.
| *1 | No. 1 Parking Brake Cable Support Bracket | *2 | No. 2 Parking Brake Cable Support Bracket |
| *3 | No. 2 Cable Support Bracket | - | - |
Install the No. 3 parking brake cable assembly with the 4 bolts and nut.
Install the No. 3 parking brake cable assembly to the backing plate with the 2 bolts.
46420
2.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY
Install the parking brake cable support bracket, cable support bracket and No. 2 cable support bracket to the No. 2 parking brake cable assembly.
| *1 | Parking Brake Cable Support Bracket | *2 | Cable Support Bracket |
| *3 | No. 2 Cable Support Bracket | - | - |
Install the No. 2 parking brake cable assembly with the 4 bolts and 2 nuts.
Install the No. 2 parking brake cable assembly to the backing plate with the 2 bolts.
47612
3.CONNECT PARKING BRAKE SHOE LEVER LH
47611
4.CONNECT PARKING BRAKE SHOE LEVER RH
Perform the same procedure as for the LH side.
46410
5.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)
Pass the No. 1 parking brake cable assembly through the parking brake control pedal assembly.
Install the clip to the No. 1 parking brake cable assembly.
Bend the parking brake control pedal assembly claw.
Temporarily install the No. 1 wire adjusting nut and lock nut.
46410
6.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)
Pass the No. 1 parking brake cable assembly through the parking brake control pedal assembly.
Install the clip to the No. 1 parking brake cable assembly.
Bend the parking brake control pedal assembly claw.
Temporarily install the No. 1 wire adjusting nut and lock nut.
46200
7.INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)
46200
8.INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)