Home › Brake › PARKING BRAKE › PARKING BRAKE ASSEMBLY
RM3160E _54 Brake _019696 PARKING BRAKE _0108002 PARKING BRAKE ASSEMBLY A

PARKING BRAKE  PARKING BRAKE ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 47456A 1.INSTALL PARKING BRAKE SHOE GUIDE PLATE

a.
C293788

Install the parking brake shoe guide plate with the parking brake shoe guide plate set bolt.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 2.APPLY HIGH TEMPERATURE GREASE

a.
C293791
0,0 0,0 false
V100135

High Temperature Grease


Apply high temperature grease to the areas of the parking brake plate which make contact with the shoes as shown in the illustration.


Hide 47447C 3.INSTALL PARKING BRAKE SHOE HOLD DOWN SPRING PIN

a.

for Front Side:

i.

Install the parking brake shoe hold down spring pin.



b.

for Rear Side:

i.

Install the parking brake shoe hold down spring pin.



Hide 47612 4.INSTALL PARKING BRAKE SHOE LEVER

a.
C293792
0,0 0,0 false
V100135

High Temperature Grease


Apply high temperature grease to the areas of the parking brake shoe lever which make contact with the No. 2 parking brake shoe assembly.


b.

Temporarily install the parking brake shoe lever to the No. 2 parking brake shoe assembly with a new parking brake shoe type C washer.


c.
C064143

Using a feeler gauge, measure the clearance between the No. 2 parking brake shoe assembly and parking brake shoe lever.

Standard Clearance:

Less than 0.35 mm (0.0138 in.)


If the clearance is not as specified, replace the parking brake shoe shim with one of the correct size.

Parking Brake Shoe Shim:
Part No. Shim Thickness
90564-09184 0.3 mm (0.0118 in.)
90564-09185 0.6 mm (0.0236 in.)
90564-09186 0.9 mm (0.0354 in.)



d.

Select a parking brake shoe shim and install it and the parking brake shoe type C washer.


e.
C064144

Using a pair of pliers, squeeze together the ends of the parking brake shoe type C washer.


f.

Check that the parking brake shoe lever moves smoothly.


Hide 47612 5.CONNECT PARKING BRAKE SHOE LEVER

a.
C296929

Using needle-nose pliers, connect the parking brake shoe lever to the No. 3 parking brake cable assembly.


Hide 46550E 6.INSTALL PARKING BRAKE SHOE RETURN TENSION SPRING (for Lower Side)

a.

Install the parking brake shoe return tension spring to the No. 2 parking brake shoe assembly.


Hide 46580 7.INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY

a.

Install the No. 1 parking brake shoe assembly to the parking brake shoe return tension spring.


Hide 47406A 8.INSTALL PARKING BRAKE SHOE ADJUSTING SCREW SET

a.
C236276
2.615,0.969 2.604,0.958 false
V100155

High Temperature Grease


Apply high temperature grease to the parking brake shoe adjusting screw set as shown in the illustration.


b.
C293783

Install the parking brake shoe adjusting screw set to the No. 1 parking brake shoe assembly and No. 2 parking brake shoe assembly.


Hide 46590 9.INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY

a.
C293782

Install the No. 2 parking brake shoe assembly to the backing plate with the parking brake shoe hold down spring cup and parking brake shoe hold down compression spring.


Hide 47613D 10.INSTALL PARKING BRAKE SHOE STRUT COMPRESSION SPRING

a.

Install the parking brake shoe strut compression spring.


Hide 46612 11.INSTALL PARKING BRAKE SHOE LEVER STRUT

a.

Install the parking brake shoe lever strut.


b.
C296928

Install the No. 1 parking brake shoe assembly.


Hide 46580 12.INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY

a.
C293778

Install the No. 1 parking brake shoe assembly to the backing plate with the parking brake shoe hold down spring cup and parking brake shoe hold down compression spring.


Hide 46550G 13.INSTALL PARKING BRAKE SHOE RETURN TENSION SPRING (for Upper Side)

NOTICE:

Be sure to install each parking brake shoe return tension spring in the correct position and direction.


a.

for Front Side:

i.

Install the parking brake shoe return tension spring.



b.

for Rear Side:

i.

Install the parking brake shoe return tension spring.



Hide 14. CHECK PARKING BRAKE INSTALLATION

a.

Check that each part is installed properly.

C293794
0.198,0.281 0.563,0.51 0.365,0.229 12 false *A 3.802,0.313 4.125,0.542 0.323,0.229 12 false *B
*A LH Side *B RH Side
V100135

Front of the Vehicle - -


NOTICE:

There should be no oil or grease on the friction surfaces of the shoe linings or discs.



Hide 42431 15.INSTALL REAR DISC

Hide 42491 16.INSTALL PARKING BRAKE SHOE ADJUSTING HOLE PLUG

Hide 17.INSTALL REAR DISC BRAKE CALIPER ASSEMBLY

Hide 18.ADJUST PARKING BRAKE SHOE CLEARANCE AND PARKING BRAKE PEDAL TRAVEL

Hide 19.INSTALL REAR WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)