Perform "Inspection After Repair" after replacing the engine assembly.
Click hereEngine / Hybrid System>1AR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION
19500
1.INSTALL IGNITION COIL ASSEMBLY
89422
2.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
83530
3.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY
89615
4.INSTALL KNOCK CONTROL SENSOR
82219A
5.INSTALL SENSOR WIRE
Install the sensor wire with the bolt.
Connect the knock control sensor connector.
17111
6.INSTALL INTAKE MANIFOLD
23814B
7.INSTALL FUEL DELIVERY PIPE
44774
8.CONNECT UNION TO VACUUM TUBE HOSE
12262
9.CONNECT NO. 2 VENTILATION HOSE
17650
10.INSTALL VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)
16261
11.INSTALL WATER BY-PASS HOSE
Connect the No. 1 water by-pass hose and No. 2 water by-pass hose to the cylinder block sub-assembly and slide the 2 clips to secure them.
22030
12.INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY
88431
13.INSTALL NO. 1 COMPRESSOR MOUNTING BRACKET
Install the No. 1 compressor mounting bracket with the 4 bolts.
25051
14.INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY (TWC: Front Catalyst)
17167
15.INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
17139
16.INSTALL NO. 2 MANIFOLD STAY
17118
17.INSTALL MANIFOLD STAY
11452
18.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
Apply a light coat of engine oil to a new O-ring.
Install the O-ring to the engine oil level dipstick guide.
Install the engine oil level dipstick guide with the bolt.
Install the engine oil level dipstick.