Home › Engine / Hybrid System › 2GR-FE COOLING › THERMOSTAT › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019667 2GR-FE COOLING _0109799 THERMOSTAT A

2GR-FE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket to the thermostat.


b.
A132392C02
1.667,0.75 0.802,0.75 false 1.344,0.094 1.667,0.292 0.323,0.198 10 false 10° 0.625,0.667 0.844,0.833 0.219,0.167 10 false *a 1.875,0.094 2.198,0.292 0.323,0.198 10 false 10°
*a Jiggle Valve
*b 10°


Install the thermostat to the water inlet housing.

HINT:

The jiggle valve may be set within 10° on either side of the prescribed position.



Hide 16321 2.INSTALL WATER INLET

a.

Install the water inlet with the 2 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 16604 4.INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

Hide 11209 8.INSTALL V-BANK COVER SUB-ASSEMBLY