Home › General › MAINTENANCE › ENGINE › from 2016.11
RM3160E _V1 General _019683 MAINTENANCE _0101216 ENGINE N

MAINTENANCE  ENGINE  GENERAL MAINTENANCE  


CAUTION / NOTICE / HINT

HINT:

Perform these procedures after the engine has cooled down.


PROCEDURE

Hide 2.REPLACE ENGINE OIL AND OIL FILTER

Hide 3.INSPECT COOLING AND HEATER SYSTEM

a.

Check that the radiator and condenser are not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.

for 1AR-FE: Click hereEngine / Hybrid System>1AR-FE COOLING>RADIATOR>ON-VEHICLE INSPECTION

for 2GR-FKS: Click hereEngine / Hybrid System>2GR-FKS (COOLING)>RADIATOR>ON-VEHICLE INSPECTION


Hide 4.REPLACE ENGINE COOLANT

a.

Hide 17801 7.INSPECT AIR CLEANER FILTER ELEMENT

a.

Remove the air cleaner filter element.


b.
A156094

Check that the air cleaner filter element is not excessively dirty.

If the air cleaner filter element is excessively dirty, replace the air cleaner filter element.


c.

If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.


d.

Reinstall the air cleaner filter element.


Hide 8.INSPECT EXHAUST PIPES AND MOUNTINGS

a.

Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.


Hide 77310A 9.INSPECT FUEL TANK CAP GASKET

Hide 10.INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS

a.

Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.


b.

Check for tank band looseness or deformation.


Hide 11.INSPECT CHARCOAL CANISTER