Home › Engine / Hybrid System › 2GR-FKS FUEL › FUEL MAIN VALVE › from 2016.11
RM3160E _51 Engine / Hybrid System _060158 2GR-FKS FUEL _0298780 FUEL MAIN VALVE A

2GR-FKS FUEL  FUEL MAIN VALVE  INSTALLATION  


PROCEDURE

Hide 23070 1.INSTALL FUEL MAIN VALVE ASSEMBLY

a.

Apply gasoline to 2 new O-rings. Then install the O-rings to the fuel main valve assembly (for Low Pressure).


b.

Apply gasoline to 2 new O-rings. Then install the O-rings to the fuel main valve assembly (for High Pressure).


c.

Install the 2 fuel main valve assemblies to the fuel filter.

A368885C01
1.698,2.063 1.271,1.594 1.271,1.594 2.896,1.594 true 4.188,1.458 5.958,1.458 5.958,1.458 5.49,2.021 true 1.813,3.302 2.177,3.302 true 5.563,3.313 5.927,3.313 true 6.021,1.385 6.333,1.542 0.313,0.156 10 false *1 1.094,1.5 1.406,1.656 0.313,0.156 10 false *2 2.229,3.229 2.542,3.385 0.313,0.156 10 false *a 5.979,3.229 6.292,3.385 0.313,0.156 10 false *a 5.438,3.521 5.594,3.719 0.156,0.198 10 false A 1.667,3.521 1.823,3.719 0.156,0.198 10 false B
*1 Fuel Main Valve Assembly (for Low Pressure) *2 Fuel Main Valve Assembly (for High Pressure)
*a Identification Mark (Part Number) - -


NOTICE:
·

Make sure that the O-rings are not cut or pinched during installation.

·

The fuel main valve assembly (for Low Pressure) and fuel main valve assembly (for High Pressure) have identification marks (part numbers). If the parts are installed in the incorrect positions, the engine may stall. Therefore, make sure to install the parts in the correct positions.



HINT:
A Fuel Main Valve Assembly (for Low Pressure) 23070-31***
B Fuel Main Valve Assembly (for High Pressure) 23070-36***



d.

Install the 2 clips to the fuel filter.


Hide 23217D 2.INSTALL FUEL PUMP FILTER

Hide 77024A 3.INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY

Hide 83320 4.INSTALL FUEL SENDER GAUGE ASSEMBLY

Hide 5.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY