Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › VALVE BODY ASSEMBLY(When Using the Engine Support Bridge) › from 2016.11
RM3160E _52 Drivetrain _019727 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0299917 VALVE BODY ASSEMBLY(When Using the Engine Support Bridge) A

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  VALVE BODY ASSEMBLY(When Using the Engine Support Bridge)  REMOVAL  


PROCEDURE

Hide 35106D 5.REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

a.
C274831

Remove the 19 bolts and automatic transaxle oil pan sub-assembly from the automatic transaxle assembly.

NOTICE:

Some fluid will remain in the automatic transaxle oil pan sub-assembly. Remove all the bolts and carefully remove the automatic transaxle oil pan sub-assembly.



Hide 35168A 6.REMOVE AUTOMATIC TRANSAXLE OIL PAN GASKET

a.

Remove the automatic transaxle oil pan gasket from the automatic transaxle oil pan sub-assembly.


Hide 35394 7.REMOVE TRANSMISSION OIL CLEANER MAGNET

a.
C306066C01
0.833,1.167 0.833,0.292 0.833,0.292 2.719,0.292 false 1.073,1.625 1.073,0.292 false 1.563,0.771 1.563,0.292 false 1.896,0.646 1.896,0.292 false 2.781,0.229 3.094,0.385 0.313,0.156 10 false *1
*1 Transmission Oil Cleaner Magnet


Remove the 4 transmission oil cleaner magnets from the automatic transaxle oil pan sub-assembly.


b.
AT00103

Examine the particles in the automatic transaxle oil pan sub-assembly.

i.

Collect any steel chips with the removed transmission oil cleaner magnets. Look carefully at the chips and particles in the automatic transaxle oil pan sub-assembly and on the transmission oil cleaner magnets to see the type of wear which might be found in the automatic transaxle assembly.

Result:
Steel (magnetic):

Bearing, gear and plate wear

Brass (non-magnetic):

Bushing wear




Hide 35330 8.REMOVE VALVE BODY OIL STRAINER ASSEMBLY

a.
C201702

Remove the 2 bolts and valve body oil strainer assembly from the transmission valve body assembly.


b.
C201703C02
1.229,0.375 0.938,0.375 false 0.74,0.302 0.948,0.49 0.208,0.188 10 *1
*1 O-ring


Remove the O-ring from the valve body oil strainer assembly.


Hide 35410 9.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

a.
C201704

Remove the 11 bolts and transmission valve body assembly from the automatic transaxle assembly.

NOTICE:

When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and automatic transaxle assembly to interfere with each other.



Hide 35148 10.REMOVE NO. 1 GOVERNOR APPLY GASKET

a.
C201316

Remove the 2 No. 1 governor apply gaskets from the automatic transaxle assembly.


Hide 35418 11.REMOVE MANUAL VALVE

a.
C299135

Remove the manual valve from the transmission valve body assembly.