11209
1.REMOVE V-BANK COVER SUB-ASSEMBLY
15370
2.REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)
Disconnect the camshaft timing oil control solenoid assembly connector.
Using a 10 mm deep socket wrench, remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
Remove the O-ring from the camshaft timing oil control solenoid assembly.
If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
Do not drop the O-ring into the timing chain cover assembly.
3.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY (for RHD)
55701J
4.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)
47220D
5.SEPARATE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (for RHD)
47233
6.REMOVE RESERVOIR BRACKET (for RHD)
12327A
7.REMOVE NO. 2 ENGINE MOUNTING STAY RH
12313
8.REMOVE ENGINE MOVING CONTROL ROD BRACKET
15370
9.REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2)
Disconnect the camshaft timing oil control solenoid assembly connector.
Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
Remove the O-ring from the camshaft timing oil control solenoid assembly.
If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
Do not drop the O-ring into the timing chain cover assembly.
15370
10.REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1)
Disconnect the camshaft timing oil control solenoid assembly connector.
Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
Remove the O-ring from the camshaft timing oil control solenoid assembly.
If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
Do not drop the O-ring into the timing chain cover assembly.
15370
11.REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1)
Disconnect the camshaft timing oil control solenoid assembly connector.
Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
Remove the O-ring from the camshaft timing oil control solenoid assembly.
If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
Do not drop the O-ring into the timing chain cover assembly.