Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Manual Seat) › 2020.02–2020.11
RM37A0E _58 Vehicle Interior _086894 SEAT _0416489 FRONT SEAT ASSEMBLY(for Manual Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Manual Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·
B401522

Be sure to read Precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION

·
B543257

Wear protective gloves. Sharp areas on the parts may injure your hands.



PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY RH

a.
B563852

Place the front seat assembly RH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Connect the front seat airbag assembly connector under the front seat assembly RH.

i.

Before connecting the connector, check that the position of the white housing lock is correct as shown in the illustration.

B345877C05
3.01,2.594 3.01,2.656 3.01,2.656 3.448,2.656 false 3,1.229 3,1.292 3,1.292 3.438,1.292 false 6.104,0.948 6.104,1.167 6.104,1.167 6.302,1.167 false 6.135,2.375 6.135,2.594 6.135,2.594 6.333,2.594 false 5.771,2.083 6.5,2.083 true 5.833,0.583 6.563,0.583 true 1.417,0.5 2.167,0.5 true 1.417,1.833 1.979,1.833 true 0.969,0.708 1.281,0.906 0.313,0.198 10 false *a 4.448,0.708 4.76,0.906 0.313,0.198 10 false *a 0.969,2.052 1.281,2.25 0.313,0.198 10 false *b 4.458,2.052 4.771,2.25 0.313,0.198 10 false *b 3.521,1.198 3.833,1.396 0.313,0.198 10 false *c 6.375,1.083 6.688,1.281 0.313,0.198 10 false *c 6.396,2.5 6.708,2.698 0.313,0.198 10 false *c 3.51,2.552 3.896,2.698 0.385,0.146 10 false *c 6.635,0.5 6.948,0.698 0.313,0.198 10 false *d 6.552,2 6.865,2.198 0.313,0.198 10 false *d 1.25,0.406 1.563,0.604 0.313,0.198 10 false *d 1.25,1.74 1.563,1.938 0.313,0.198 10 false *d
*a Correct *b Incorrect
*c Yellow CPA *d White Housing Lock



ii.

Be sure to engage the connectors until they are locked (when locking, make sure that a click sound can be heard).

NOTICE:
·

When connecting any airbag connector, take care not to damage the airbag wire harness.

·

When engaged, the white housing lock will slide. Be sure not to hold the white housing lock and upper part of the yellow CPA, as it may result in an insecure fit.





c.

Connect each connector and engage each clamp under the front seat assembly RH.


d.

Temporarily install the front seat assembly RH with the 4 bolts.


e.

Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.


f.
B563851N01
2.938,0.542 3.094,0.74 0.156,0.198 10 true 1 1.927,1.833 2.083,2.031 0.156,0.198 10 true 2

Using a T50 "TORX" socket wrench, tighten the 2 bolts on the front side of the front seat assembly RH.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)

NOTICE:

Tighten the bolts in the order shown in the illustration.



g.

Operate the seat track adjusting handle and move the front seat assembly RH to the foremost position.


h.
B563850N01
1.063,1.49 1.219,1.688 0.156,0.198 10 true 1 2.146,1.49 2.302,1.688 0.156,0.198 10 true 2

Using a T50 "TORX" socket wrench, tighten the 2 bolts on the rear side of the front seat assembly RH.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)

NOTICE:

Tighten the bolts in the order shown in the illustration.



Hide 2.INSPECT SEAT SLIDE ADJUSTER LOCK

a.

While performing a sliding operation of the front seat assembly RH, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the front seat assembly RH installation bolts and adjust the adjuster position.


Hide 72157A 3.INSTALL INNER SEAT TRACK BRACKET COVER

a.

Operate the seat track adjusting handle and move the front seat assembly RH to the foremost position.


b.
B563849

Engage the 2 claws and guide to install the inner seat track bracket cover.


Hide 72137B 4.INSTALL SEAT TRACK COVER

a.
B563848

Engage the 2 claws and guide to install the seat track cover.


Hide 72127A 5.INSTALL FRONT INNER SEAT TRACK BRACKET COVER

a.

Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.


b.
B563847

Engage the 2 claws to install the front inner seat track bracket cover.


Hide 72123A 6.INSTALL FRONT OUTER SEAT TRACK BRACKET COVER

a.
B563846

Engage the 2 claws to install the front outer seat track bracket cover.


Hide 71910A 7.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly to the front seat assembly RH.


Hide 8.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

for HV Model: Click hereGeneral>MAINTENANCE>A25A-FXS, A25B-FXS AUXILIARY BATTERY>INSTALLATION

for Gasoline Model: Click hereGeneral>MAINTENANCE>2GR-FKS BATTERY>INSTALLATION

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 58441L 9.INSTALL BATTERY SERVICE HOLE COVER (for HV Model)

Hide 10.CHECK SEAT HEATER (w/ Seat Heater System)