Home › Engine / Hybrid System › 2GR-FKS (FUEL) › FUEL INJECTOR (for Port Injection)
RM37A0E _51 Engine / Hybrid System _086852 2GR-FKS FUEL _0417507 FUEL INJECTOR(for Port Injection) A

2GR-FKS FUEL  FUEL INJECTOR(for Port Injection)  INSTALLATION  


PROCEDURE

Hide 23250F 1.INSTALL PORT FUEL INJECTOR ASSEMBLY

HINT:

Perform "Inspection After Repair" after replacing a port fuel injector assembly.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Apply a light coat of spindle oil or gasoline to 6 new O-rings, and install one to each port fuel injector assembly.

NOTICE:

Check that there is no damage or foreign matter on the groove of the port fuel injector assembly when installing the O-ring to each port fuel injector assembly.



b.

for Bank 1:

i.

Connect the 3 port fuel injector assembly connectors.


ii.
A368859C01
0.771,1.948 1.354,1.948 true 2.021,1.188 2.323,1.188 false 1.396,1.865 1.708,2.021 0.313,0.156 10 false *a 2.365,1.104 2.677,1.26 0.313,0.156 10 false *a
*a Stopper


Install the 3 port fuel injector assemblies to the fuel delivery pipe with sensor assembly.

NOTICE:
·

Make sure that the port fuel injector assembly is located within the stopper as shown in the illustration.

·

Check that the port fuel injector assembly installation holes of the fuel delivery pipe with sensor assembly are not damaged and are free of foreign matter.

·

Make sure that the O-ring is not damaged, twisted or moved out of place when installing the port fuel injector assembly.




iii.

Engage the clamp to connect the No. 5 engine wire to the fuel delivery pipe with sensor assembly.



c.

for Bank 2:

i.

Connect the 3 port fuel injector assembly connectors.


ii.
A368860C01
1.375,1 1.625,1 false 2.063,2 2.729,2 true 1.896,1.906 2.208,2.063 0.313,0.156 10 false *a 1.208,0.906 1.521,1.063 0.313,0.156 10 false *a
*a Stopper


Install the 3 port fuel injector assemblies to the fuel delivery pipe with sensor assembly.

NOTICE:
·

Make sure that the port fuel injector assembly is located within the stopper as shown in the illustration.

·

Check that the port fuel injector assembly installation holes of the fuel delivery pipe with sensor assembly are not damaged and are free of foreign matter.

·

Make sure that the O-ring is not damaged, twisted or moved out of place when installing the port fuel injector assembly.




iii.

Engage the clamp to connect the No. 5 engine wire to the fuel delivery pipe with sensor assembly.



Hide 23291A 2.INSTALL INJECTOR VIBRATION INSULATOR

a.

Install 6 new injector vibration insulators to the intake manifold.


Hide 23807V 3.INSTALL NO. 1 DELIVERY PIPE SPACER

a.

Install the 4 No. 1 delivery pipe spacers to the intake manifold.


Hide 23800 4.INSTALL FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY

a.

Place the fuel delivery pipe with sensor assembly with the 6 port fuel injector assemblies onto the intake manifold.

NOTICE:

Be careful not to drop the port fuel injector assemblies when installing the fuel delivery pipe with sensor assembly.



b.

Temporarily install the fuel delivery pipe with sensor assembly with the 6 port fuel injector assemblies to the intake manifold with the 4 bolts.


c.
A454389N01
1.396,1.073 1.552,1.271 0.156,0.198 10 true 2 1.906,1.042 2.063,1.24 0.156,0.198 10 true 4 1,1.51 1.156,1.708 0.156,0.198 10 true 3 2.344,0.583 2.5,0.781 0.156,0.198 10 true 1

Tighten the 4 bolts in the order shown in the illustration.

Torque:
17 N*m (173 kgf*cm, 13 ft.*lbf)


d.

Connect the 2 No. 5 engine wire connectors.


e.

Connect the fuel pressure sensor connector.


Hide 5.CONNECT FUEL TUBE SUB-ASSEMBLY

a.

Connect the fuel tube sub-assembly to the fuel delivery pipe with sensor assembly.

Click hereEngine / Hybrid System>2GR-FKS (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 17190 6.INSTALL INTAKE AIR SURGE TANK ASSEMBLY

Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 9.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing a port fuel injector assembly.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION