Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA (for Rear) › 2020.02–2020.11
RM37A0E _56 Audio / Visual / Telematics _086880 PARK ASSIST / MONITORING _0417853 TELEVISION CAMERA(for Rear) A

PARK ASSIST / MONITORING  TELEVISION CAMERA(for Rear)  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link

*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.

Rear television camera assembly*
w/ Parking Assist Monitor System:
·

Parking assist monitor system initialization

·

Television camera assembly optical axis (Back camera position setting)


Parking Assist Monitor System (Click here)
w/ Panoramic View Monitor System:

Rear television camera view adjustment


Panoramic View Monitor System (Click here)
Replacement or removal and installation of 2 or more parts:
·

Front television camera assembly, radiator grille sub-assembly or front bumper assembly

·

Rear television camera assembly

·

Side television camera assembly LH or outer rear view mirror assembly LH

·

Side television camera assembly RH or outer rear view mirror assembly RH


w/ Panoramic View Monitor System:

Television camera view adjustment



Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link

*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.

Rear television camera assembly*
w/ Parking Assist Monitor System:
·

Parking assist monitor system initialization

·

Television camera assembly optical axis (Back camera position setting)


Parking Assist Monitor System (Click here)
w/ Panoramic View Monitor System:

Rear television camera view adjustment


Panoramic View Monitor System (Click here)
Replacement or removal and installation of 2 or more parts:
·

Front television camera assembly, radiator grille sub-assembly or front bumper assembly

·

Rear television camera assembly

·

Side television camera assembly LH or outer rear view mirror assembly LH

·

Side television camera assembly RH or outer rear view mirror assembly RH


w/ Panoramic View Monitor System:

Television camera view adjustment



PROCEDURE

Hide 67848E 1.REMOVE BACK DOOR SERVICE HOLE COVER LH

Hide 67847 2.REMOVE BACK DOOR SERVICE HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 64780A 3.REMOVE BACK DOOR TRIM PANEL ASSEMBLY

Hide 4.REMOVE TELEVISION CAMERA ASSEMBLY WITH NOZZLE

a.
E432198

Disconnect the washer hose.

HINT:

Use a container to collect the windshield washer fluid.



b.
E432199

Disconnect the connector.


c.
E432200

Remove the 2 nuts.


d.
E432201C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 claws and remove the television camera assembly with nozzle as shown in the illustration.


Hide 867F0 5.REMOVE CAMERA CLEANER NOZZLE ASSEMBLY

Hide 86790D 6.REMOVE REAR TELEVISION CAMERA ASSEMBLY