16535
1.INSTALL LOWER RADIATOR SUPPORT
Install the 2 lower radiator supports to the radiator assembly.
16523A
2.INSTALL RADIATOR SUPPORT CUSHION
Install the 2 radiator support cushions to the radiator assembly.
16400
3.INSTALL RADIATOR ASSEMBLY
Engage the 2 guides.
Engage the 2 claws to install the fan with motor assembly to the radiator assembly.
Do not damage the radiator assembly when installing the fan with motor assembly.
Install the radiator assembly with the fan with motor assembly to the vehicle body.
Do not apply excessive force to the cooler condenser assembly or pipe when installing the radiator assembly with the fan with motor assembly.
Engage the 2 guides.
Engage the 2 claws to install the cooler condenser assembly to the radiator assembly.
Make sure not to damage the cooler condenser assembly when installing the cooler condenser assembly.
Engage the 2 clamps to connect the wire harness to the fan with motor assembly.
Connect the cooling fan motor connector and rotate the lever to lock it.
When connecting the cooling fan motor connector, make sure that the connecting parts of the cooling fan motor connector are free of dirt, water or other foreign matter.
Be sure to securely connect the cooling fan motor connector.
Engage the clamp to connect the wire harness to the fan with motor assembly.
Connect the cooling fan motor connector.
G9229A
4.CONNECT NO. 5 INVERTER COOLING HOSE
Engage the 3 clamps and connect the No. 5 inverter cooling hose to the fan with motor assembly.
G9228A
5.CONNECT NO. 4 INVERTER COOLING HOSE
Engage the clamp and connect the No. 4 inverter cooling hose to the fan with motor assembly.
16572D
6.CONNECT NO. 2 RADIATOR HOSE
Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.
Engage the clamp to connect the No. 2 radiator hose to the fan with motor assembly.
16571C
7.CONNECT NO. 1 RADIATOR HOSE
Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.
Engage the clamp to connect the No. 1 radiator hose to the fan with motor assembly.
16283D
8.CONNECT NO. 6 WATER BY-PASS HOSE
Connect the No. 6 water by-pass hose to the radiator assembly.
16281
9.CONNECT NO. 4 WATER BY-PASS HOSE
Connect the No. 4 water by-pass hose to the radiator assembly and slide the clip to secure it.
16594A
10.INSTALL NO. 2 RADIATOR AIR GUIDE
Install the No. 2 radiator air guide.
Install the hood lock control cable assembly to the No. 2 radiator air guide.
53205
11.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY
Engage the 3 claws.
Install the upper radiator support sub-assembly with the 5 bolts.
Engage the clamp to connect the hood lock control cable assembly to the upper radiator support sub-assembly.
Install the inlet hose with the bolt.
Connect the 2 horn connectors and vehicle approaching speaker assembly connector.
16593B
12.INSTALL NO. 1 RADIATOR AIR GUIDE RH
Engage the guide and claw.
Install the No. 1 radiator air guide RH with the clip.
16595B
13.INSTALL NO. 1 RADIATOR AIR GUIDE LH
Engage the guide and claw.
Install the No. 1 radiator air guide LH with the clip.
17750A
14.INSTALL INLET AIR CLEANER ASSEMBLY
53510
15.INSTALL HOOD LOCK ASSEMBLY
88790B
16.INSTALL THERMISTOR ASSEMBLY
52021
17.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
52611
18.INSTALL FRONT BUMPER ENERGY ABSORBER
19.INSTALL HEADLIGHT ASSEMBLY
20.ADD ENGINE COOLANT (for Engine)
21.INSPECT FOR COOLANT LEAK (for Engine)
51420
22.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
51441
23.INSTALL NO. 1 ENGINE UNDER COVER
53851D
24.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
53852B
25.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH