28100
1.INSTALL STARTER ASSEMBLY
Type A:
Install the starter assembly with the 2 bolts.
Type B:
Using an E8 "TORX" socket wrench, temporarily install the starter assembly with the 2 stud bolts.
Install the starter assembly with the 2 nuts.
Connect the engine wire to the terminal 30 with the nut.
Close the terminal cap.
Connect the starter assembly connector.
74404B
2.INSTALL BATTERY CLAMP SUB-ASSEMBLY
89661
3.INSTALL ECM
17700
4.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
17750A
5.INSTALL INLET AIR CLEANER ASSEMBLY
53295E
6.INSTALL COOL AIR INTAKE DUCT SEAL
7.INSTALL BATTERY