Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › 2020.02–2020.11
RM37A0E _56 Audio / Visual / Telematics _086877 AUDIO / VIDEO _0420540 AUDIO AND VISUAL SYSTEM U

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  TERMINALS OF ECU  


HINT:

Check from the rear of the connector while it is connected to the components.


RADIO AND DISPLAY RECEIVER ASSEMBLY


E380286N02
1.469,0.25 1.885,0.5 0.417,0.25 3.385,0.26 3.802,0.51 0.417,0.25 1.688,1.917 2.104,2.167 0.417,0.25 3.406,1.917 3.823,2.167 0.417,0.25 4.833,1.927 5.25,2.177 0.417,0.25 3.51,0.302 3.938,0.521 0.427,0.219 10 false H2 1.583,0.292 2.01,0.51 0.427,0.219 10 false H1 4.948,1.969 5.375,2.188 0.427,0.219 10 false RA 3.448,1.958 3.875,2.177 0.427,0.219 10 false H100 1.813,1.958 2.24,2.177 0.427,0.219 10 false H9

Terminal No. (Symbol) Terminal Description Condition Specified Condition
H9-1 (FR+) - H1-1 (GND1) Sound signal (Front right) Audio system playing A waveform synchronized with sound signals is output
H9-2 (FL+) - H1-1 (GND1) Sound signal (Front left) Audio system playing A waveform synchronized with sound signals is output
H9-3 (RL+) - H1-1 (GND1) Sound signal (Rear left) Audio system playing A waveform synchronized with sound signals is output
H9-4 (RR+) - H1-1 (GND1) Sound signal (Rear right) Audio system playing A waveform synchronized with sound signals is output
H9-6 (FR-) - H1-1 (GND1) Sound signal (Front right) Audio system playing A waveform synchronized with sound signals is output
H9-7 (FL-) - H1-1 (GND1) Sound signal (Front left) Audio system playing A waveform synchronized with sound signals is output
H9-8 (RL-) - H1-1 (GND1) Sound signal (Rear left) Audio system playing A waveform synchronized with sound signals is output
H9-9 (RR-) - H1-1 (GND1) Sound signal (Rear right) Audio system playing A waveform synchronized with sound signals is output
H1-1 (GND1) - Body ground Ground Always Below 1 Ω
H1-4 (+B1) - H1-1 (GND1) Power source (+B) Ignition switch off*3
Always*4
11 to 14 V
H1-15 (ACC1) - H1-1 (GND1) Power source (ACC) Ignition switch off Below 1 V
Ignition switch ACC 11 to 14 V
H1-19 (TX+)*2 AVC-LAN communication signal - -
H1-20 (TX-)*2 AVC-LAN communication signal - -
H1-21 (SW1) - H1-24 (SWG) Steering pad switch signal No switch pushed 2.97 to 3.56 V
Seek+ switch pushed 0.27 to 0.35 V
Seek- switch pushed 0.86 to 1.03 V
Volume+ switch pushed 1.51 to 1.79 V
Volume- switch pushed 2.22 to 2.66 V
H1-22 (SW2) - H1-24 (SWG) Steering pad switch signal No switch pushed 2.97 to 3.56 V
MODE switch pushed 0.27 to 0.35 V
On/off hook switch pushed 1.51 to 1.79 V
Voice switch pushed 2.22 to 2.66 V
H1-24 (SWG) - Body ground Steering pad switch ground Always Below 1 Ω
H1-27 (SPD) - H1-1 (GND1) Vehicle speed signal See "Vehicle Signal Check Mode" in Operation Check
(Click here)
-
H1-28 (REV) - H1-1 (GND1) Reverse signal See "Check Vehicle Signal" in Operation Check
(Click here)
-
H2-3 (TMUT) - H1-1 (GND1)*1 Mute signal Audio system playing Above 2 V
Emergency call mode Below 1 V
H2-5 (CNH1) Local bus communication signal - -
H2-6 (CNL1) Local bus communication signal - -
H2-13 (CANH) CAN communication signal - -
H2-14 (CANL) CAN communication signal - -
H2-15 (ILL+) - H1-1 (GND1) Illumination signal Light control switch off Below 1 V
Ignition switch off
Light control switch in tail or head position
11 to 14 V
H2-16 (ILL-) - H1-1 (GND1) Illumination signal Light control switch off Below 1 V
Light control switch in tail or head position Pulse generation
H2-19 (IG) - H1-1 (GND1) Power source (IG) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
H2-20 (PKB) - H1-1 (GND1) Parking brake signal See "Check Vehicle Signal" in Operation Check
(Click here)
-
H2-21 (MIN+) - H1-1 (GND1) Microphone voice signal See "Check Microphone" in Operation Check
(Click here)
-
H2-22 (MIN-) - H1-1 (GND1) Microphone voice signal See "Check Microphone" in Operation Check
(Click here)
-
H2-23 (MACC) - H1-1 (GND1) Microphone power supply Microphone power supply Below 1 V
Ignition switch ACC 4 to 6 V
H2-24 (SGND) - Body ground Shield ground Always Below 1 Ω
H2-25 (SNS2) - H1-1 (GND1) Microphone connection detection signal Always Below 1 V
H2-26 (CSLD) - Body ground Shield ground Always Below 1 V
H2-27 (CGND) - Body ground Camera ground Always Below 1 V
H2-28 (V+) - H1-1 (GND1) Video signal Ignition switch ON
Shift lever in R
Camera lens not covered, displaying an image
Pulse generation
(Refer to waveform 1)
Ignition switch ON
Shift lever in R
Camera lens covered, blacking out screen
Pulse generation
(Refer to waveform 2)
H2-29 (V-) - H1-1 (GND1) Ground Always Below 1 V
H2-30 (CA+) - H1-1 (GND1) Rear television camera assembly power supply Ignition switch ACC 5.5 to 7.05 V
H100-1 (USV1) Power source - -
H100-2 (US1-) Data signal - -
H100-3 (US1+) Data signal - -
H100-4 (UGD1) Ground - -
H100-5 (USG1) Shield ground Always Below 1 Ω
RA-5 (ANT+) - H1-1 (GND1) Power source of antenna Ignition switch ACC
Radio switch on and AM or FM selected
11 to 14 V

*1: w/ Telematics Transceiver

*2: w/ Rear Seat Entertainment System

*3: for HV Model

*4: for Gasoline Model


a.

Reference (Oscilloscope waveform):

i.
E265840C01
0.823,2.073 1,2.073 1,2.073 1.125,1.583 false 1.479,2.063 1.344,2.063 1.344,2.063 1.229,1.479 false 0.781,4.167 0.958,4.167 0.958,4.167 1.156,3.594 false 1.521,4.125 1.385,4.125 1.385,4.125 1.271,3.542 false 0.229,0.229 0.542,0.427 0.313,0.198 10 *a 0.396,1.052 0.76,1.313 0.365,0.26 10 GND 0.396,3.208 0.76,3.469 0.365,0.26 10 GND 0.26,2.271 0.625,2.531 0.365,0.26 10 *b 0.646,4.073 1.01,4.333 0.365,0.26 10 *c 0.656,1.979 1.021,2.24 0.365,0.26 10 *c 1.51,1.969 1.875,2.229 0.365,0.26 10 *d 1.542,4.052 1.906,4.313 0.365,0.26 10 *d
*a Waveform 1 (camera lens not covered, displaying an image)
*b Waveform 2 (camera lens covered, blacking out the screen)
*c Synchronization Signal
*d Video Waveform


Waveform 1 (camera lens not covered, displaying an image)

Item Content
Measurement terminal H2-28 (V+) - H2-29 (V-)
Measurement setting 200 mV/DIV., 50 μs/DIV.
Condition Ignition switch ON, shift lever in R

HINT:
·

The video waveform changes according to the image sent by the rear television camera assembly.

·

The video waveform is constantly output when the ignition switch is turned to ACC.




ii.

Waveform 2 (camera lens covered, blacking out the screen)

Item Content
Measurement terminal H2-28 (V+) - H2-29 (V-)
Measurement setting 200 mV/DIV., 50 μs/DIV.
Condition Ignition switch ON, shift lever in R

HINT:
·

The video waveform changes according to the image sent by the rear television camera assembly.

·

The video waveform is constantly output when the ignition switch is turned to ACC.






TELEMATICS TRANSCEIVER (w/ Telematics Transceiver)


Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for ERA-GLONASS)>TERMINALS OF ECU





REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>REAR VIEW MONITOR SYSTEM>TERMINALS OF ECU


REAR TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)


Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>TERMINALS OF ECU


TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System)


Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR SEAT ENTERTAINMENT SYSTEM>TERMINALS OF ECU