Home › Drivetrain › P810 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER POSITION SENSOR
RM37A0E _52 Drivetrain _086860 P810 HYBRID TRANSMISSION / TRANSAXLE _0420897 SHIFT LEVER POSITION SENSOR A

P810 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
C332327

·

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 53852B 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851D 3.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

Hide 51420 5.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 12601B 6.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 53295E 7.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 17750A 8.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 9.REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Hide 33820B 10.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C426967

Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.


c.
C426968

Using a screwdriver, disengage the 4 claws and disconnect the transmission control cable assembly with the clip from the No. 1 transmission control cable bracket.


d.
C377870

Using a screwdriver, disengage the 2 claws and remove the clip from the transmission control cable assembly.


Hide 89451A 11.REMOVE SHIFT LEVER POSITION SENSOR

a.
C426976

Disconnect the shift lever position sensor connector.


b.
C426977

Remove the nut, washer and control shaft lever from the shift lever position sensor.


c.
C426978C01
1.125,1.438 1.469,1.438 true 1.802,1.375 1.958,1.052 1.958,1.052 2.094,1.052 true 0.906,1.354 1.125,1.552 0.219,0.198 10 true *1 2.115,0.948 2.354,1.146 0.24,0.198 10 true *a
*1 Lock Plate
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, pry out the tabs of the lock plate.


d.
C426979C01
1.063,1.438 1.438,1.438 true 1.729,1.438 1.969,1.24 1.969,1.24 2.104,1.24 true 2.135,1.146 2.375,1.333 0.24,0.188 10 true *1 0.875,1.354 1.083,1.531 0.208,0.177 10 true *2
*1 Lock Nut
*2 Lock Plate


Remove the lock nut and lock plate from the shift lever position sensor.


e.
C426980

Remove the 2 bolts and shift lever position sensor from the hybrid vehicle transaxle assembly.