Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ Parking Support Brake System (Forward/reverse Type)) › 2020.02–2020.11
RM37A0E _56 Audio / Visual / Telematics _086880 PARK ASSIST / MONITORING _0420182 TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/ Parking Support Brake System) C

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/ Parking Support Brake System)  C1AE196  Ultrasonic Sensor (Front Left Corner) Component Internal Failure  


DESCRIPTION

The front corner ultrasonic sensor LH is installed on the front bumper. The clearance warning ECU assembly detects obstacles based on signals it receives from the front corner ultrasonic sensor LH. If an open circuit or other malfunction occurs in the front corner ultrasonic sensor LH, the front corner ultrasonic sensor LH does not operate correctly.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AE196 Ultrasonic Sensor (Front Left Corner) Component Internal Failure Front corner ultrasonic sensor LH failure
·

Front corner ultrasonic sensor LH

·

Clearance warning ECU assembly



CAUTION / NOTICE / HINT

NOTICE:
·

Perform registration after replacing or removing and installing the ultrasonic sensor or clearance warning ECU assembly.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ Parking Support Brake System (Forward/reverse Type))>CALIBRATION

·

If a DTC is detected again after the repair, turn the ignition switch to ON and turn the TOYOTA parking assist-sensor system on, and then clear the DTC.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ Parking Support Brake System (Forward/reverse Type))>DTC CHECK / CLEAR



PROCEDURE

1.CHECK FOR DTC
a.

According to the display on the GTS, check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

b.

According to the display on the GTS, clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

c.

Recheck for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
No DTC is output A
"C1AE196" is output B
"C1AE196" and "C1AE187" are output C



A

B

2.INSPECT FRONT CORNER ULTRASONIC SENSOR LH

C

2.INSPECT FRONT CORNER ULTRASONIC SENSOR LH
a.

b.

Result:
Proceed to
OK
NG



OK

3.REPLACE FRONT CORNER ULTRASONIC SENSOR LH

NG

3.REPLACE FRONT CORNER ULTRASONIC SENSOR LH
a.

Replace the front corner ultrasonic sensor LH with a new or normally functioning one.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR (for Front)>REMOVAL

HINT:

To check if the ultrasonic sensor is functioning correctly, replace it with another ultrasonic sensor.



Result:
Proceed to
NEXT



NEXT

4.CHECK FOR DTC
4.CHECK FOR DTC
a.

According to the display on the GTS, check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

b.

According to the display on the GTS, clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

c.

Recheck for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
No DTC is output A
"C1AE196" is output B



A

END (FRONT CORNER ULTRASONIC SENSOR LH WAS DEFECTIVE)

B