Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for 8 Inch Display) › from 2020.11
RM37A0E _56 Audio / Visual / Telematics _086878 NAVIGATION / MULTI INFO DISPLAY _0418790 NAVIGATION SYSTEM(for 8 Inch Display) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for 8 Inch Display)  C1610  Camera ECU Malfunction  


DESCRIPTION

This DTC is stored when a malfunction occurs in the panoramic view monitor system*1 or parking assist monitor system*2.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1610 Camera ECU Malfunction Malfunction occurs in the panoramic view monitor system*1
Malfunction occurs in the parking assist monitor system*2
·

Panoramic view monitor system*1

·

Parking assist monitor system*2

·

Radio and display receiver assembly



*1: w/ Panoramic View Monitor System

*2: w/o Panoramic View Monitor System


CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for 8 Inch Display)>PRECAUTION


PROCEDURE

1.CHECK MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
w/ Panoramic View Monitor System A
w/o Panoramic View Monitor System B



A

2.CHECK DTC (PANORAMIC VIEW MONITOR SYSTEM)

B

3.CHECK DTC (PARKING ASSIST MONITOR SYSTEM)
2.CHECK DTC (PANORAMIC VIEW MONITOR SYSTEM)
a.

Clear the DTCs.

Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
50002 353

b.

Recheck for DTCs and check that no DTCs are output.

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
50001 353
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

4.CHECK DTC (NAVIGATION SYSTEM)

NG

3.CHECK DTC (PARKING ASSIST MONITOR SYSTEM)
a.

Clear the DTCs.

Chassis > Parking Assist Camera > Clear DTCs
50002 85

b.

Recheck for DTCs and check that no DTCs are output.

Chassis > Parking Assist Camera > Trouble Codes
50001 85
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

4.CHECK DTC (NAVIGATION SYSTEM)

NG

4.CHECK DTC (NAVIGATION SYSTEM)
a.

Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs
50002 212

b.

Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

END

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY