CD Sound Skips
Circuit diagnosis · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
INSPECTION PROCEDURE
| 1. CHECK DISC |
 |
- Check that the disc is not deformed or cracked.
- OK:
- No deformation or cracks on the disc
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. CHECK DISC |
 |
- Check the disc.
- OK:
- The disc is clean.
- HINT:
- If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. CHECK OPERATION |
 |
Check if the problem recurs using another disc.
- OK:
- The problem does not occur.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY |
 |
Check that the radio and display receiver assembly is properly installed (Click here).
- OK:
- Radio and display receiver assembly is properly installed.
|
NG |
 |
|
| REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY |
|
|
| OK |
|
 |
|
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|