2014 Hilux · Service Manual BODY ELECTRICAL

CD Sound Skips

Circuit diagnosis · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

INSPECTION PROCEDURE

HINT:
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for T-connect.


1. CHECK DISC

  1. I100152
    Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
CHANGE DISC
OK


2. CHECK DISC

  1. I100151
    Disc cleaning
    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      OK:
      Malfunction disappears.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.



NG
Go to step 3
OK

END (DISC IS DIRTY)

3. REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with a known good one and recheck that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

END (DISC IS DEFECTIVE)

4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Check that the radio and display receiver assembly is properly installed (Click here).

    OK:
    Radio and display receiver assembly is properly installed.



NG
REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY (Click here)
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)


← CD Sound Skips (Aug 2012 – Jul 2013)Radio Broadcast cannot be Received (Bad Reception) (Jun 2011 – Jul 2012) →