2014 Hilux · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for RHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the RH side.


1. REMOVE RECLINING POWER SEAT SWITCH KNOB

  1. B207076E02
    Apply protective tape around the front seat cushion shield.

  1. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  1. B207077E02
    Apply protective tape around the front seat cushion shield.

  1. Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


3. REMOVE FRONT SEAT CUSHION SHIELD RH

  1. B207078
    Remove the 2 screws.

  1. B207039
    Remove the 3 screws.

  1. Detach the claw and guide.

  1. Remove the front seat cushion shield RH.


4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD RH

  1. B207079
    Remove the 2 screws.

  1. Detach the 2 claws and remove the front inner No. 1 seat cushion shield RH.


5. REMOVE FRONT POWER SEAT SWITCH RH

  1. B207080
    Remove the 3 screws.

  1. Disconnect the connector and remove the front power seat switch RH.


6. REMOVE FRONT SEAT INNER CUSHION SHIELD RH

  1. B278519
    Remove the screw.

  1. Detach the claw and guide.

  1. B278520
    Pull the front seat inner cushion shield RH to detach the claw and remove the front seat inner cushion shield RH.


7. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

B284021E01
  1. Disconnect the connector and detach the 3 clamps.

  1. B284020
    Roll up the front seat cushion cover LH.

  1. Remove the nut and front seat inner belt assembly.

  1. Remove the buckle cover.


8. REMOVE FRONT SEAT CUSHION COVER RH
  1. Remove the front seat cushion cover RH.


9. REMOVE FRONT SEAT CUSHION COVER WITH PAD

  1. B207501
    Remove the hog rings.

  1. B284719
    for LHD, w/ Seat Heater System:

    1. Disconnect the 2 front seat cushion heater assembly LH connectors.

    2. Detach the 4 front seat cushion heater assembly LH clamps.

  1. Bend the 2 front seat cushion frame claws upward.

  1. Detach the hooks and remove the front seat cushion cover with pad.

    B277279


10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

  1. B207624
    Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.


11. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH (for LHD, w/ Seat Heater System)

  1. B284712
    Cut off the tack pins which hold down the front seat cushion heater assembly LH, and then remove the front seat cushion heater assembly LH from the separate type front seat cushion cover.

    NOTICE:
    Be careful not to damage the separate type front seat cushion cover.


12. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY (w/ Front Seat Side Airbag)

  1. B284720
    Detach the 4 front seat airbag wire harness clamps.

  1. B284721
    Disconnect the No. 1 seat wire connector and detach the wire harness clamp.

  1. B284722
    for LHD, w/ Seat Heater System:
    Detach the front seatback heater assembly LH wire harness clamp.

  1. B284723
    Remove the 2 screws, 4 bolts and separate type front seatback assembly.


13. REMOVE RECLINING ADJUSTER INSIDE COVER RH (w/ Front Seat Side Airbag)

  1. B284724
    Detach the guide and remove the reclining adjuster inside cover RH.


14. REMOVE RECLINING ADJUSTER INSIDE COVER LH (w/ Front Seat Side Airbag)

  1. B284725
    Detach the guide and remove the reclining adjuster inside cover LH.


15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

  1. B284721
    w/o Front Seat Side Airbag:
    Disconnect the No. 1 seat wire connector and detach the wire harness clamp.

  1. B284726
    Remove the hog rings from the wires of the separate type front seatback cover, and then roll up the separate type front seatback cover.

  1. Pass the No. 1 seat wire through the hole of the separate type front seatback cover.

  1. B286377
    for LHD, w/ Seat Heater System:
    Pass the front seatback heater assembly LH wire harness through the hole of the separate type front seatback cover.

  1. B284728
    Remove the hog rings and detach the strap of the separate type front seatback cover, and then roll up the separate type front seatback cover and No. 1 seatback cloth.

  1. B284730
    Pass the strap of the separate type front seatback cover through the holes of the separate type front seatback pad.

  1. B284732
    w/ Front Seat Side Airbag:
    Remove the nut and detach the separate type front seatback cover bracket.

  1. Remove the hog rings and roll up the separate type front seatback cover.

    B284734E01

    Text in Illustration 
    *A
    w/o Front Seat Side Airbag
    *B
    w/ Front Seat Side Airbag
    *a
    Front view of front seatback
    *b
    Rear view of front seatback

  1. B207089
    Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover from the separate type front seatback pad.


16. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH (for LHD, w/ Seat Heater System)

  1. B284710
    Cut off the tack pins which hold down the front seatback heater assembly LH, and then remove the front seatback heater assembly LH from the separate type front seatback cover.

    NOTICE:
    Be careful not to damage the separate type front seatback cover.


17. REMOVE SEPARATE TYPE FRONT SEATBACK PAD

  1. B207090
    Remove the separate type front seatback pad from the separate type front seatback spring assembly.


18. REMOVE NO. 1 SEATBACK CLOTH

  1. B277282
    Remove the No. 1 seatback cloth.


19. REMOVE RECLINING ADJUSTER INSIDE COVER RH

B207093
  1. Remove the screw.

  1. Detach the claw and remove the reclining adjuster inside cover RH.


20. REMOVE RECLINING ADJUSTER INSIDE COVER RH (w/o Front Seat Side Airbag)

B171585E02
  1. Remove the screw.

  1. Detach the guide and remove the reclining adjuster inside cover RH.


21. REMOVE RECLINING ADJUSTER INSIDE COVER LH

B207094
  1. Remove the screw.

  1. Detach the claw and remove the reclining adjuster inside cover LH.


22. REMOVE RECLINING ADJUSTER INSIDE COVER LH (w/o Front Seat Side Airbag)

B171583E02
  1. Remove the screw.

  1. Detach the guide and remove the reclining adjuster inside cover LH.


23. REMOVE POWER SEAT MOTOR ASSEMBLY (for Reclining, w/o Front Seat Side Airbag)
(Click here)

24. REMOVE POWER SEAT MOTOR ASSEMBLY (for Slide)
(Click here)

25. REMOVE POWER SEAT MOTOR ASSEMBLY (for Rear Lifter)
(Click here)

26. REMOVE FRONT LOWER SEAT CUSHION SHIELD RH

B207095
  1. Remove the screw.

  1. Detach the 4 claws and remove the front lower seat cushion shield RH.


27. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH

B207096
  1. Remove the screw.

  1. Detach the 4 claws and remove the front lower seat cushion shield LH.


28. REMOVE FRONT SEAT WIRE RH

B291580
  1. Detach the wire harness clamp.

  1. Detach the 2 claws and remove the front seat wire RH.


29. REMOVE NO. 1 SEAT WIRE

  1. B286469
    w/ Front Seat Side Airbag:
    Disconnect the front power seat motor assembly (for Reclining) connector.

  1. Detach the 2 wire harness clamps and remove the No. 1 seat wire.


30. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY (w/o Front Seat Side Airbag)

  1. B207098
    Remove the 4 bolts and separate type front seatback spring assembly.

← DISASSEMBLY (Aug 2012 – Jul 2013)REASSEMBLY (Jun 2011 – Jul 2012) →