Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT DIFFERENTIAL CARRIER ASSEMBLY
RM1840EF _52 Drivetrain _009618 AXLE AND DIFFERENTIAL _0052563 FRONT DIFFERENTIAL CARRIER ASSEMBLY A

AXLE AND DIFFERENTIAL  FRONT DIFFERENTIAL CARRIER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY

a.
C237477

Install the front No. 3 differential support with the 2 bolts.

Torque:
108 N*m (1100 kgf*cm, 80 ft.*lbf)


b.
C237476

Install the front No. 2 mounting support with the 2 bolts.

Torque:
160 N*m (1632 kgf*cm, 118 ft.*lbf)


c.
C237475

Install the front No. 1 mounting support with the 3 bolts.

Torque:
186 N*m (1899 kgf*cm, 137 ft.*lbf)


d.

Support the front differential with a jack.


e.
C282332
0.656,0.208 0.969,0.406 0.313,0.198 10 false *1 2.625,0.167 2.938,0.365 0.313,0.198 10 false *1 2.167,1.833 2.479,2.031 0.313,0.198 10 false *2
*1 Mounting Bolt
*2 Mounting Nut


Install the 2 front mounting bolts and 2 nuts.

Torque:
137 N*m (1400 kgf*cm, 101 ft.*lbf)


f.

Install the front No. 1 differential mounting nut.

Torque:
87 N*m (889 kgf*cm, 64 ft.*lbf)


g.

Install the front differential breather tube bracket with the bolt.

Torque:
13 N*m (131 kgf*cm, 9 ft.*lbf)


h.

Lower the jack.


Hide 3.INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.