1.INSTALL AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the air conditioning tube and accessory assembly (air conditioning pressure sensor).
ND-OIL 8 or equivalent
Install the 2 O-rings to the air conditioning tube and accessory assembly (air conditioning pressure sensor).
Install the air conditioning tube and accessory assembly with the 3 bolts.
Connect the connector.
2.INSTALL INTAKE AIR CONNECTOR AND AIR CLEANER ASSEMBLY (for TR Series Engine)
3.INSTALL AIR CLEANER ASSEMBLY (for 1KD-FTV, 2KD-FTV)
4.INSTALL NO. 2 AIR CLEANER HOSE (for 1GR-FE)
5.INSTALL AIR CLEANER ASSEMBLY (for 1GR-FE)
6.INSTALL V-BANK COVER (for 1GR-FE)
7.INSTALL RADIATOR SIDE DEFLECTOR RH
Install the radiator side deflector RH with the 3 clips.
8.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
9.INSTALL FRONT BUMPER REINFORCEMENT EXTENSION LH
10.INSTALL FRONT BUMPER REINFORCEMENT EXTENSION RH
11.INSTALL ENGINE SIDE COVER SUB-ASSEMBLY LH
12.INSTALL ENGINE SIDE COVER SUB-ASSEMBLY RH
13.INSTALL FRONT BUMPER COVER
14.INSTALL RADIATOR GRILLE
15.CHARGE REFRIGERANT
16. WARM UP ENGINE
17.CHECK FOR REFRIGERANT GAS LEAK