Vehicle Stability Control System
Symptom
| Suspected Area
| See page
|
ABS, BA and/or EBD does not operate
| Check for DTCs again and make sure that the normal system code is output
|
Click here
|
IG power source circuit (low power supply voltage malfunction)
|
Click here
|
IG power source circuit (high power supply voltage malfunction)
|
Click here
|
Front speed sensor circuit (open or short malfunction)
|
Click here
|
Front speed sensor circuit (output malfunction)
|
Click here
|
Rear speed sensor circuit (open or short malfunction)
|
Click here
|
Rear speed sensor circuit (output malfunction)
|
Click here
|
Check the brake actuator assembly with the intelligent tester (check brake actuator assembly operation using the Active Test function). If abnormal, check the hydraulic circuit for leaks.
|
Click here
|
If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly).
|
Click here
|
ABS, BA and/or EBD does not operate efficiently
| Check for DTCs again and make sure that the normal system code is output
|
Click here
|
Front speed sensor circuit (open or short malfunction)
|
Click here
|
Front speed sensor circuit (output malfunction)
|
Click here
|
Rear speed sensor circuit (open or short malfunction)
|
Click here
|
Rear speed sensor circuit (output malfunction)
|
Click here
|
Stop light switch circuit
|
Click here
|
Check the brake actuator assembly with the intelligent tester (check brake actuator assembly operation using the Active Test function). If abnormal, check the hydraulic circuit for leaks.
|
Click here
|
If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly).
|
Click here
|
ABS sensor DTC check cannot be performed
| Check for DTCs again and make sure that the normal system code is output
|
Click here
|
TC and CG terminal circuit
|
Click here
|
If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly).
|
Click here
|
ABS warning light abnormal (Remains on)
| Refer to ABS Warning Light Remains ON
|
Click here
|
ABS warning light abnormal (Does not come on)
| Refer to ABS Warning Light does not Come ON
|
Click here
|
Brake warning light abnormal (Remains on)
| Refer to Brake Warning Light Remains ON
|
Click here
|
Brake warning light abnormal (Does not come on)
| Refer to Brake Warning Light does not Come ON
|
Click here
|
VSC and/or TRC does not operate
| Check for DTCs again and make sure that the normal system code is output
|
Click here
|
IG power source circuit (low power supply voltage malfunction)
|
Click here
|
IG power source circuit (high power supply voltage malfunction)
|
Click here
|
Check the hydraulic circuit for leaks
| -
|
Front speed sensor circuit (open or short malfunction)
|
Click here
|
Front speed sensor circuit (output malfunction)
|
Click here
|
Rear speed sensor circuit (open or short malfunction)
|
Click here
|
Rear speed sensor circuit (output malfunction)
|
Click here
|
Yaw rate and acceleration sensor circuit (zero point malfunction)
|
Click here
|
Yaw rate and acceleration sensor circuit (power supply malfunction)
|
Click here
|
Yaw rate sensor circuit (comparison malfunction)
|
Click here
|
Steering angle sensor circuit (zero point malfunction)
|
Click here
|
Steering angle sensor circuit (output malfunction)
|
Click here
|
If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly).
|
Click here
|
VSC sensor DTC check cannot be performed
| Check for DTCs again and make sure that the normal system code is output
|
Click here
|
TC and CG terminal circuit
|
Click here
|
If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly).
|
Click here
|
TRC OFF indicator light abnormal (Remains on)
| Refer to TRC OFF Indicator Light Remains ON
|
Click here
|
TRC OFF indicator light abnormal (Does not come on)
| Refer to TRC OFF Indicator Light does not Come ON
|
Click here
|
VSC OFF indicator light abnormal (Remains on)
| Refer to VSC OFF Indicator Light Remains ON
|
Click here
|
VSC OFF indicator light abnormal (Does not come on)
| Refer to VSC OFF Indicator Light does not Come ON
|
Click here
|
Slip indicator light abnormal (Remains on)
| Refer to Slip Indicator Light Remains ON
|
Click here
|
Slip indicator light abnormal (Does not come on)
| Refer to Slip Indicator Light does not Come ON
|
Click here
|
Test Mode (signal check) cannot be performed
| TS and CG terminal circuit
|
Click here
|
Skid control ECU (Brake actuator assembly)
|
Click here
|