84725A
1.INSTALL DIFFERENTIAL LOCK SWITCH
|
Install in this Direction |
Attach the 2 claws to install the differential lock switch to the lower instrument cover sub-assembly.
Connect the differential lock switch connector.
55407C
2.INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY
55405B
3.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
58804A
4.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
58808
5.INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Automatic Transmission)
33504F
6.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
55011A
7.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
55012A
8.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
55667
9.INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH
10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
11.CHECK SRS WARNING LIGHT