88460
1.INSTALL COOLER CONDENSER ASSEMBLY
|
Install in this Direction |
Install the cooler condenser assembly.
Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condenser assembly.
88716A
2.CONNECT COOLER REFRIGERANT LIQUID PIPE A
Remove the vinyl tape from the cooler refrigerant liquid pipe A and the connecting part of the cooler condenser assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the cooler refrigerant liquid pipe A.
ND-OIL 8 or equivalent
Install the O-ring to the cooler refrigerant liquid pipe A.
Keep the O-ring and O-ring fitting surfaces free of foreign matter.
Connect the cooler refrigerant liquid pipe A to the cooler condenser assembly with the bolt.
88711
3.CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the vinyl tape from the No. 1 cooler refrigerant discharge hose and the connecting part of the cooler condenser assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 cooler refrigerant discharge hose.
ND-OIL 8 or equivalent
Install the O-ring to the No. 1 cooler refrigerant discharge hose.
Keep the O-ring and O-ring fitting surfaces free of foreign matter.
Connect the No. 1 cooler refrigerant discharge hose to the condenser assembly with the bolt.
16400
4.INSTALL RADIATOR ASSEMBLY
for 1KD-FTV:
Click hereEngine / Hybrid System>1KD-FTV COOLING>RADIATOR>INSTALLATION
for 2KD-FTV:
Click hereEngine / Hybrid System>2KD-FTV COOLING>RADIATOR>INSTALLATION
53294C
5.INSTALL RADIATOR SIDE DEFLECTOR LH
w/ Energy Absorber:
Attach the claw to install the radiator side deflector LH.
w/o Energy Absorber:
Attach the claw to install the radiator side deflector LH.
for Steel Type Bumper:
Attach the claw to install the radiator side deflector LH.
53293C
6.INSTALL RADIATOR SIDE DEFLECTOR RH
w/ Energy Absorber:
Attach the claw to install the radiator side deflector RH.
w/o Energy Absorber:
Attach the claw to install the radiator side deflector RH.
for Steel Type Bumper:
Attach the claw to install the radiator side deflector RH.
53205
7.INSTALL RADIATOR UPPER SUPPORT SUB-ASSEMBLY
Connect each clamp to install the radiator upper support sub-assembly.
Install the radiator upper support sub-assembly with the 4 bolts.
Install the No. 1 radiator air guide with 4 new clips.
53208A
8.INSTALL HOOD LOCK SUPPORT SUB-ASSEMBLY
Install the hood lock support sub-assembly with the 3 bolts.
Attach each clamp.
for Automatic Air Conditioning System:
Attach the clamp to install the thermistor assembly (ambient temperature sensor).
53510
9.CONNECT HOOD LOCK ASSEMBLY
86510
10.INSTALL HIGH PITCHED HORN ASSEMBLY
Click hereVehicle Exterior>HORN>HORN>INSTALLATION
86520
11.INSTALL LOW PITCHED HORN ASSEMBLY
Click hereVehicle Exterior>HORN>HORN>INSTALLATION
52119A
12.INSTALL FRONT BUMPER COVER
for Resin Type Bumper:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Resin Type Bumper)>INSTALLATION
for Resin Type Bumper:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Steel Type Bumper)>INSTALLATION
13. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
14. WARM UP ENGINE
15.INSPECT FOR REFRIGERANT LEAK