Home › Engine / Hybrid System › 5L-E LUBRICATION › OIL PUMP › from 2016.01
RM3250E _51 Engine / Hybrid System _049916 5L-E LUBRICATION _0244989 OIL PUMP A

5L-E LUBRICATION  OIL PUMP  REMOVAL  


PROCEDURE

Hide 22100 3.REMOVE INJECTION PUMP ASSEMBLY

Hide 88431 4.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET

Hide 16333 5.REMOVE WATER OUTLET HOUSING

Hide 16291 6.REMOVE WATER HOSE JOINT

Hide 12311 8.REMOVE NO. 1 FRONT ENGINE MOUNTING BRACKET RH

Hide 13523P 9.REMOVE CAMSHAFT TIMING PULLEY

Hide 11322B 10.REMOVE NO. 2 TIMING BELT COVER

Hide 16100 11.REMOVE WATER PUMP ASSEMBLY

Hide 13505 12.REMOVE NO. 1 TIMING BELT IDLER SUB-ASSEMBLY

Hide 13502 13.REMOVE NO. 2 TIMING BELT IDLER SUB-ASSEMBLY

Hide 13521P 14.REMOVE CRANKSHAFT TIMING PULLEY

Hide 12101 15.REMOVE OIL PAN SUB-ASSEMBLY

a.

Remove the 16 bolts and 2 nuts.


b.
A057637

Insert the blade of an oil pan seal cutter between the oil pan sub-assembly and cylinder block sub-assembly, cut off the applied sealer and remove the oil pan sub-assembly.

NOTICE:
·

Do not use an oil pan seal cutter for the timing belt case side and rear oil seal retainer.

·

Be careful not to damage the oil pan flange.




Hide 15104 16.REMOVE OIL STRAINER SUB-ASSEMBLY

a.

Remove the 2 bolts, 2 nuts, oil strainer and gasket from the cylinder block sub-assembly.


Hide 11301C 17.REMOVE FRONT CRANKSHAFT OIL SEAL

Hide 11301 18.REMOVE TIMING BELT CASE SUB-ASSEMBLY

a.
A378217

Remove the 5 bolts, timing belt case sub-assembly and gasket from the cylinder block sub-assembly.