88431
1.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)
Remove the 4 bolts and compressor mounting bracket.
13471
2.REMOVE CRANKSHAFT PULLEY
11302
3.REMOVE TIMING BELT COVER
13566A
4.REMOVE TIMING BELT GUIDE
5.SET NO. 1 CYLINDER TO TDC/COMPRESSION
13568
6.REMOVE TIMING BELT
13521P
7.REMOVE CRANKSHAFT TIMING PULLEY
17114A
8.REMOVE INTAKE FLANGE
26100
9.REMOVE VENTURI ASSEMBLY
10.REMOVE INJECTION PIPE SUB-ASSEMBLY
19871
11.REMOVE NO. 1 GLOW PLUG CONNECTOR
23760
12.REMOVE NOZZLE LEAKAGE PIPE ASSEMBLY
23600
13.REMOVE NOZZLE HOLDER AND NOZZLE SET
19850
14.REMOVE GLOW PLUG ASSEMBLY
13613P
15.REMOVE INJECTION PUMP DRIVE PULLEY
22100
16.REMOVE INJECTION PUMP ASSEMBLY
89422C
17.REMOVE ENGINE COOLANT TEMPERATURE SENSOR
11401G
18.REMOVE CRANKSHAFT POSITION SENSOR
11452
19.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
17111
20.REMOVE INTAKE MANIFOLD
88420
21.REMOVE IDLE PULLEY ASSEMBLY WITH BRACKET (w/ Air Conditioning System)
Remove the 3 bolts and idle pulley assembly with bracket.
16333
22.REMOVE WATER OUTLET HOUSING
Remove the 3 bolts, outlet housing and gasket.
16291
23.REMOVE WATER HOSE JOINT
Remove the water hose joint.
12311
24.REMOVE NO. 1 FRONT ENGINE MOUNTING BRACKET RH
Remove the 4 bolts and No. 1 front engine mounting bracket RH.
44443
25.REMOVE PUMP BRACKET
Remove the 6 bolts and pump bracket.
29300A
26.REMOVE VACUUM PUMP OIL INLET HOSE
27.REMOVE UNION
Remove the union from the cylinder block sub-assembly.
29300B
28.REMOVE VACUUM PUMP OIL OUTLET HOSE
Slide the clip and remove the vacuum pump oil outlet hose from the oil pan sub-assembly.
17167
29.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
17141
30.REMOVE EXHAUST MANIFOLD
83530
31.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY
15601
32.REMOVE OIL FILTER SUB-ASSEMBLY
15609
33.REMOVE OIL FILTER BRACKET SUB-ASSEMBLY