Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT DIFFERENTIAL CARRIER ASSEMBLY › from 2016.01
RM3250E _52 Drivetrain _038039 AXLE AND DIFFERENTIAL _0186172 FRONT DIFFERENTIAL CARRIER ASSEMBLY A

AXLE AND DIFFERENTIAL  FRONT DIFFERENTIAL CARRIER ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
A350542

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

·
C313282C03
2.573,0.583 2.906,0.583 false 2.948,0.479 3.26,0.677 0.313,0.198 10 false *a
*a Object Exceeding Weight Limit of Transmission Jack


Be sure to perform this procedure with several people as the front differential carrier assembly is very heavy.

·

Be sure to follow the procedure described in the repair manual, or the transmission jack may suddenly drop or a part may fall.



PROCEDURE

Hide 1.PLACE FRONT WHEELS FACING STRAIGHT AHEAD

Hide 2.SECURE STEERING WHEEL ASSEMBLY

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51442 4.REMOVE NO. 2 ENGINE UNDER COVER

Hide 43420 7.REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

Hide 43410 8.REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 31470 9.REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

a.
C323257

Remove the bolt and disconnect the bracket.


b.

Remove the 2 bolts and clutch release cylinder assembly.


Hide 17105 10.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH (for 1GR-FE)

Hide 28100 11.REMOVE STARTER ASSEMBLY (for 1GR-FE)

Hide 45219 12.DISCONNECT STEERING SLIDING YOKE

Hide 44200 13.REMOVE POWER STEERING LINK ASSEMBLY

a.
C326775C01
1.667,1.063 1.677,0.917 false
V113147

Remove in Direction


Remove the 2 bolts, 2 washers and 2 nuts, and then slide the power steering link assembly slightly towards the front.

NOTICE:

Never turn the nut. Be sure to turn the bolt.



Hide 41110F 14.REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY

a.
C330144

w/ A.D.D.

i.

Disconnect the front differential breather hose from the differential breather tube bracket.



b.
C323253

Remove the bolt and disconnect the differential breather tube bracket.


c.
C323254

Disconnect the front differential breather hose from the front differential union.


d.
C323255

Disconnect the oil temperature sensor connector.


e.

Remove the bolt and disconnect the bracket.


f.
C323256

w/ A.D.D.

i.

Disconnect the differential motor actuator connector.



g.

Remove the bolt and disconnect the bracket.


h.
C323259

Support the front differential carrier assembly with a jack.


i.

Remove the 4 bolts, nut and front No. 1 differential support from the front differential carrier assembly.


j.
C323261C01
0.875,0.396 1.323,0.396 false 0.885,1.854 1.438,1.854 false 1.375,0.302 1.688,0.5 0.313,0.198 10 false *1 1.49,1.771 1.802,1.969 0.313,0.198 10 false *2
*1 Upper Differential Mount Stopper
*2 Lower Differential Mount Stopper


Remove the upper differential mount stopper and lower differential mount stopper from the front No. 1 differential support.


k.
C323258

Remove the 3 bolts, nut and front No. 2 differential support from the front differential carrier assembly.


l.
C323262C01
2.229,0.417 2.594,0.417 false 1.854,1.875 2.531,1.875 false 2.063,0.333 2.375,0.531 0.313,0.198 10 false *1 1.677,1.792 1.99,1.99 0.313,0.198 10 false *2
*1 Upper Differential Mount Stopper
*2 Lower Differential Mount Stopper


Remove the upper differential mount stopper and lower differential mount stopper from the front No. 2 differential support.


m.
C323260

Remove the differential mount nut and disconnect the front No. 3 differential support.


n.

Lower the jack and remove the front differential carrier assembly.

CAUTION:

The front differential carrier assembly is a heavy component. Make sure that it is supported securely.


NOTICE:
·

Securely support the front differential carrier assembly while performing this step to avoid excessively tilting or dropping the front differential carrier assembly.

·

The remaining oil may leak out when removing the front differential carrier assembly.

·

Do not damage the installation surface when removing the front differential carrier assembly.

·

Remove the bolts with the front differential carrier assembly secured.



C322627C01
4.427,0.135 4.74,0.333 0.313,0.198 10 false *a 4.479,2.031 4.792,2.229 0.313,0.198 10 false *b 4.49,4.229 4.802,4.427 0.313,0.198 10 false *a 4.521,6.031 4.833,6.229 0.313,0.198 10 false *b 0.552,4.177 0.865,4.375 0.313,0.198 10 false *a 0.604,6.094 0.917,6.292 0.313,0.198 10 false *b
*a Rear of Vehicle *b Side of Vehicle
V113147

Remove in this Direction - -



o.
C237477

Remove the 2 bolts and front No. 3 differential support from the front differential carrier assembly.