| Theft deterrent system cannot be set
|
ECU power source circuit
|
|
| Immobiliser system "security indicator light does not blink"*1
|
|
| Immobiliser system "security indicator light does not blink"*2
|
|
| Security indicator light circuit*2
|
|
| Door courtesy switch circuit
|
|
| Front door lock assembly
|
|
| Engine hood courtesy switch circuit
|
|
| Unlock warning switch circuit*2
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for LHD)
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for RHD)
|
|
| Security indicator light does not blink when theft deterrent system is set
|
ECU power source circuit
|
|
| Security indicator light circuit*2
|
|
| Immobiliser system "security indicator light does not blink"*1
|
|
| Immobiliser system "security indicator light does not blink"*2
|
|
| Alarm sounding state cannot be canceled when ignition switch is turned to ON*1
|
Entry and start system (for start function)
|
|
| Certification ECU (smart key ECU assembly)
|
-
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for LHD)
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for RHD)
|
|
| Alarm sounding state cannot be canceled when ignition switch is turned to ON*2, *3
|
Ignition switch circuit
|
|
| Theft deterrent system can be set even when door is open
|
Door courtesy switch circuit
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for LHD)
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for RHD)
|
|
| Theft deterrent system can be set even when engine hood is open
|
Engine hood courtesy switch circuit
|
|
| Vehicle horn does not sound while theft deterrent system is in warning operation
|
Horn circuit
|
|
| The intrusion sensor does not turn off (w/ Intrusion Sensor)
|
Intrusion sensor cancel switch circuit
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for LHD)
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for RHD)
|
|
| The vehicle does not enter the alarm sounding state according to intrusion sensor operation (w/ Intrusion Sensor)
|
Intrusion sensor cancel switch circuit
|
|
| Intrusion sensor circuit
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for LHD)
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for RHD)
|
|
| Hazard warning lights do not flash while theft deterrent system is in warning operation
|
Combination meter assembly
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for LHD)
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for RHD)
|
|
| Security horn does not sound while theft deterrent system is in warning operation (w/ Security Horn Assembly)
|
Security horn circuit
|
|
| The theft warning siren assembly does not operate due to the battery being disconnected when the vehicle is in the alarm sounding state (w/ Theft Warning Siren Assembly)
|
Theft warning siren circuit
|
|
| Hazard warning lights flash even when theft deterrent system is not set
|
Combination meter assembly
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for LHD)
|
|
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the body ECU (for RHD)
|
|