Home › Vehicle Interior › POWER OUTLETS (INT) › POWER POINT SOCKET(for Double Socket Type)
RM33J0E _58 Vehicle Interior _038505 POWER OUTLETS (INT) _0189740 POWER POINT SOCKET(for Double Socket Type) A

POWER OUTLETS (INT)  POWER POINT SOCKET(for Double Socket Type)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for LHD vehicles.



PROCEDURE

Hide 85535B 1.INSTALL NO. 1 POWER OUTLET SOCKET COVER

HINT:

Use the same procedure for both power outlet socket covers.


a.
E323448C04
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the No. 1 power outlet socket cover as shown in the illustration.


Hide 85530 2.INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY

HINT:

Use the same procedure for both power outlet socket assemblies.


a.
E323447C04
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the No. 1 power outlet socket assembly as shown in the illustration.


Hide 55407C 3.INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY

Hide 73900 4.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY (w/ Knee Airbag)

Hide 55606 5.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)

Hide 55045 6.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (w/o Knee Airbag)

Hide 45287 7.INSTALL STEERING COLUMN LOWER COVER

Hide 84013A 8.INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55918A 9.INSTALL AIR INLET DAMPER CONTROL LEVER (for Manual Air Conditioning System)

Hide 55905J 10.INSTALL CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55900 11.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

Hide 58810J 12.INSTALL CONSOLE BOX ASSEMBLY (w/ Console Box Lid)

Hide 58810J 13.INSTALL CONSOLE BOX ASSEMBLY (w/o Console Box Lid)

Hide 55410C 14.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 45100 15.INSTALL STEERING WHEEL ASSEMBLY

Hide 16.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION