71512S
1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Separate Seat Type)
Refer to the precautions on wrinkles to avoid creating any on the separate type front seat cushion cover when installing the seat cover.
As shown in the illustration, fix all of the cover seam allowances in the same direction.
Temporarily install the separate type front seat cushion cover to the separate type front seat cushion pad.
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings in the order shown in the illustration.
| *1 | Hog Ring Pliers | - | - |
| *a | Cutout | - | - |
Using hog ring pliers, connect the 2 straps of the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.
Do not dirty or damage the separate type front seatback cover.
Securely tighten the hog rings as shown in the illustration while making sure wrinkles do not form in the center of the fabric and separate type front seatback pad.
| *1 | Hog Ring Pliers | - | - |
2.INSTALL SEAT CUSHION COVER WITH PAD (for Separate Seat Type)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
71014S
3.INSTALL FRONT SEAT BACK FRAME SUB-ASSEMBLY LH (for Separate Seat Type)
Use the same procedure as for the driver seat.
for Hi-back Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
for Low-back Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
71862
4.INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Separate Seat Type)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
73240
5.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Separate Seat Type)
71812D
6.INSTALL FRONT SEAT CUSHION SHIELD LH (for Separate Seat Type)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
72526E
7.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Separate Seat Type)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
71512S
8.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Bench Seat Type)
Refer to the precautions on wrinkles to avoid creating any on the separate type front seat cushion cover when installing the seat cover.
As shown in the illustration, fix all of the cover seam allowances in the same direction.
Set the separate type front seat cushion cover.
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 7 new hog rings in the order indicated in the illustration.
| *1 | Hog Ring Pliers |
| *a | Cutout |
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Install the hog rings at the cutouts if they are there.
9.INSTALL SEAT CUSHION COVER WITH PAD (for Bench Seat Type)
10.INSTALL SEATBACK COVER WITH PAD (for Bench Seat Type)
71862
11.INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Bench Seat Type)
71812D
12.INSTALL FRONT SEAT CUSHION SHIELD LH (for Bench Seat Type)
72526E
13.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Bench Seat Type)
14.INSTALL FRONT SEAT ASSEMBLY LH (for Separate Seat Type)
15.INSTALL FRONT SEAT ASSEMBLY LH (for Bench Seat Type)