77377
1.INSTALL FUEL FILLER OPENING LID LOCK RETAINER
|
Install in this Direction |
Install a new fuel filler opening lid lock retainer as shown in the illustration.
77035
2.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for LHD)
|
Install in this Direction |
Attach the claw to install the fuel lid lock control cable sub-assembly to the fuel filler opening lid lock retainer as shown in the illustration.
Attach the fuel lid lock control cable sub-assembly to each clamp as shown in the illustration.
Install the grommet to the vehicle body.
| *1 | Fuel Lid Lock Control Cable Sub-assembly | *2 | Grommet |
77035
3.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for RHD)
|
Install in this Direction |
Attach the claw to install the fuel lid lock control cable sub-assembly to the fuel filler opening lid lock retainer as shown in the illustration.
Attach the fuel lid lock control cable sub-assembly to each clamp as shown in the illustration.
Install the grommet to the vehicle body.
| *A | for 4WD without VSC | - | - |
| *1 | Fuel Lid Lock Control Cable Sub-assembly | *2 | Grommet |
77306
4.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for LHD)
77306
5.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for RHD)
65638
6.INSTALL REAR WHEEL HOUSE LINER LH
Install the rear wheel house liner.
58510D
7.INSTALL FRONT FLOOR CARPET ASSEMBLY
Install the floor carpet.
62514A
8.INSTALL LOWER QUARTER TRIM PANEL LH
62112
9.INSTALL COWL SIDE TRIM BOARD LH (for LHD)
62111C
10.INSTALL COWL SIDE TRIM BOARD RH (for RHD)
67914B
11.INSTALL FRONT DOOR SCUFF PLATE LH
67913B
12.INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)
58901A
13.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (for RHD, w/ Rear Console Box)
14.INSTALL FRONT SEAT ASSEMBLY RH (for RHD)
15.INSTALL FRONT SEAT ASSEMBLY LH
for Manual Seat:
Use the same procedure described for the RH side.
for Bench Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Bench Seat Type)>INSTALLATION