1.REMOVE REAR WHEEL
47850
2.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH
Remove the 2 bolts and disconnect the rear disc brake cylinder assembly LH.
Do not disconnect the flexible hose from the rear disc brake cylinder assembly LH.
Do not twist or bend the flexible hose.
47830
3.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH
Use the same procedure described for the LH side.
42431
4.REMOVE REAR DISC
5.REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
6.REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
7.REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
67914B
8.REMOVE FRONT DOOR SCUFF PLATE LH
67913B
9.REMOVE FRONT DOOR SCUFF PLATE RH
67918E
10.REMOVE REAR DOOR SCUFF PLATE LH
67917C
11.REMOVE REAR DOOR SCUFF PLATE RH
62414A
12.REMOVE LOWER CENTER PILLAR GARNISH LH
62413A
13.REMOVE LOWER CENTER PILLAR GARNISH RH
46334
14.REMOVE INTERMEDIATE LEVER PROTECTOR
Partially remove the floor carpet.
It is not necessary to fully remove the floor carpet. Partially remove it so that the intermediate lever protector can be removed in a later step.
Remove the 3 bolts and intermediate lever protector with No. 2 console box mounting bracket.
58996A
15.REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET
Remove the 2 bolts and No. 2 console box mounting bracket from the intermediate lever protector.
46439
16.REMOVE PARKING BRAKE CABLE HEAT INSULATOR
Remove the 2 bolts and parking brake cable heat insulator.
46439A
17.REMOVE NO. 2 PARKING BRAKE CABLE HEAT INSULATOR
Remove the 2 bolts and No. 2 parking brake cable heat insulator.
18.REMOVE PROPELLER SHAFT ASSEMBLY
19.REMOVE FUEL TANK
46410
20.REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY
Remove the 2 bolts (labeled A).
| *1 | No. 1 Parking Brake Cable Assembly | *2 | No. 2 Parking Brake Cable Assembly |
| *3 | No. 3 Parking Brake Cable Assembly | *4 | Parking Brake Equalizer Sub-assembly |
| *5 | Cable Support Bracket | - | - |
Remove the clip and pin from the No. 3 parking brake cable assembly.
Disconnect the No. 1 parking brake cable assembly from the No. 3 parking brake cable assembly.
Disconnect the No. 1 parking brake cable assembly from the parking brake equalizer sub-assembly.
Disconnect the No. 1 parking brake cable assembly from the cable support bracket.
Remove the No. 1 parking brake cable assembly from inside the vehicle.
Remove the bolt (labeled B) and cable support bracket.
46420
21.REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
Disconnect the No. 2 parking brake cable assembly from the parking brake shoe lever.
Refer to the procedures up to the removal of the brake shoe.
Click hereBrake>PARKING BRAKE>PARKING BRAKE ASSEMBLY(for Rear Disc Brake)>DISASSEMBLY
Remove the 2 bolts and disconnect the No. 2 parking brake cable assembly from the backing plate.
Disconnect the No. 2 parking brake cable assembly from the parking brake equalizer sub-assembly.
| *1 | No. 2 Parking Brake Cable Assembly | *2 | Parking Brake Equalizer Sub-assembly |
Remove the 4 bolts and No. 2 parking brake cable assembly.
46304
22.REMOVE PARKING BRAKE EQUALIZER SUB-ASSEMBLY
Remove the 2 bolts and parking brake equalizer sub-assembly.
46430
23.REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY
Disconnect the No. 3 parking brake cable assembly from the parking brake shoe lever.
Refer to the procedures up to the removal of the brake shoe.
Click hereBrake>PARKING BRAKE>PARKING BRAKE ASSEMBLY(for Rear Disc Brake)>DISASSEMBLY
Remove the 2 bolts and disconnect the No. 3 parking brake cable assembly from the backing plate.
Remove the clip.
| *1 | No. 3 Parking Brake Cable Assembly | - | - |
Remove the 4 bolts, nut and No. 3 parking brake cable assembly.